Jump to content
SAU Community

Recommended Posts

Gday fellas

Havent taken my car out for a while from the garage, but over the last couple of weeks im geting this noise.

It sounds like engine noise and is coming from the engine bay its like a squeeling noise and comes and goes as i Accellerate ( funny thing is it only turns on when i turn on the Air conditioning and stops th eminiute i turn off the AC button)

On another note the Airconditioning is no longer cool ( Do you think the noise has anything to do with the Re-gass being nescesary) ?

The part that weirds me out is Engine noise as i understand is usually stereo related, but i have no sound in the car, the deck is out, and so are the amps, so just speakers sitting in the sockets with wires attached and nothing on the end ....

either way weirderd out

Link to comment
https://www.sau.com.au/forums/topic/341962-engine-noise-from-airconditioning/
Share on other sites

could be that the compressor is stuffed and the squealing is the compressor seizing up enough that the belt is slipping. this could also be the reason why the air con is no longer cold. or it could simply be that it needs regassing (to make it cold again, but not to get rid of the squeal).

Thanks Guys

The compressor idea is a good one,

The squeeling, is not like a belt squeeling noise, it sounde like electronic engine noise,

maybe this is also due to the compressor failing...

will check the belt this evening

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
×
×
  • Create New...