Jump to content
SAU Community

Recommended Posts

hey guys, i have a r32 gtr which has been running a bit weird latetly.

at first it was occasionally about once a week, but now its getting more common, like at least everytime i drive it.

cold mornings its fine, once it starts warming up is when the problem occurs.

i first noticed it when i parked my car, let the turbo timer do its thing then just as i was walking away it started spluttering at idle, did that for 5 seconds then regained normal idle. it also did this while waiting at a set of traffice lights (even while i was rolling upto them) blip the throttle a few times and it sometimes goes back to normal idle.

why is it doin this?? its VERY annoying, ive even swapped the idle position sensor and still had the same problem.

also say im just driving down the road, it will even splutter (like its out of fuel?) nd have no response on throttle. then as im trying to accelerate in gear (while still doin speed limit, slowly gettin slower) it sounds like it misfires. sometimes this goes on for 5 mins and i cant even drive it, and other times its over in 10 seconds? then back to prefectly normal.

even if you hold your foot in the same spot on the accelerator pedal, it will cut out, accelerate, cut out etc..

i seriously have no idea whats wrong with it.. fuel pump? something to do with idle control? but that wont help the problem while at speed? it could be 2 different problems.

if anyone could help that would be GREATLY appreciated

Cheers.

Also check the cam angle sensor, you can just unbolt it and have a look. Mine had broken teeth causing this, replaced with $100 second hand CAS and worked fine.

^ When I changed the turbos it started fine, misfired after 20 mins, started feeling like you were turning the ignition on/off etc. I checked afm's, cleaned injectors, filter, ignition module, etc. Replaced the CAS with a mates, still no go, changed back to mine, worked fine. Turned out the plug for the CAS just needed a wiggle/twist. Dunno if your prob is the same but,

Coils: I'd unplug one coil to see if it sounds different/makes it worse. Check each coil, takes but a few mins.

AFM: I'd simply get AFM cleaner and clean it anyways, if it's the stock one. Few bucks, worth it.

CAS: Wiggle the plug/Unplug and reseat. Borrow one from a friend before spending money on replacement.

Fuel Filter: Cheap, but nasty to replace if you have big hands.

Plugs: How old?

cheers guys, its hard to diagnose cos its not always happening, just sometimes desides to do it.

wiggled/unplugged the CAS - same

its not the coils either, checked them

plugs are probly due for a change, but that would make it run shit all the time? or not?

but when i un-plugged the AFM it started to run shitty, exactly like the problem i explained above.. then after a few seconds it regains idle but wont rev over a few thousand revs, (not crisp anyway)

is there any sort of tests for AFM?? to see if they working correctly? or faulty?

thanks, will try to find an igniter and see how it goes.

but how do you know if the AFMs are dodgy? any way of telling? or just have to swap nd see?

just swapped the AFMs with another working pair from another GTR, seems to be working perfectly fine atm.

hopefully this is the problem! nothing worse than not knowing what the hell is wrong, hate guess work haha

need to find a set of AFMs now, or find out which one was faulty if not both.

thanks alot guys!

Cheers.

just swapped the AFMs with another working pair from another GTR, seems to be working perfectly fine atm.

hopefully this is the problem! nothing worse than not knowing what the hell is wrong, hate guess work haha

need to find a set of AFMs now, or find out which one was faulty if not both.

thanks alot guys!

Cheers.

Id replace both. If you do try to buy a set of nismo ones, they are more expensive but have the same characteristics of a Z32 meter which is good if you make some more serious mods to the motor.

Yeh I was looking at some nismo ones, still not sure yet.. Either quick and cheaper fix with STD ones or upgrade to z32 or nismo and get it re tuned. I do wana upgrade the engine later down the track tho, but my pockets arnt deep enough at the moment hah

May go for the cheap fix first then upgrade a bit later on

Cheers mate

fair enough.. looks serious! haha

i just got HKS pods, lookin to change to the Apexi setup.. will get onto nismo ones soon!

but in the meantime will std AFMs from a Aus delivered GTR work on an imported GTR? i was just wondering if they are diff?? probs a stupid question but am just curious?

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
    • Did some FASTing ...got the impression that the actual part# was a moot point ; seems all of these hardlines for coolant are discontinued/NLA... like, I take it you're after the hardline that bolts onto to the manifold...that's NLA according to amayama & nengun .... ...just to clear up some confusion, they typically mounted the AAC valve to the intake manifold somewhere near a coolant passage, so the body of the valve heats up & holds it open when engine's up to temp - no coolant flows through the valve, it's a mechanical, thermal connection.
×
×
  • Create New...