Jump to content
SAU Community

Recommended Posts

hey guys, i have a r32 gtr which has been running a bit weird latetly.

at first it was occasionally about once a week, but now its getting more common, like at least everytime i drive it.

cold mornings its fine, once it starts warming up is when the problem occurs.

i first noticed it when i parked my car, let the turbo timer do its thing then just as i was walking away it started spluttering at idle, did that for 5 seconds then regained normal idle. it also did this while waiting at a set of traffice lights (even while i was rolling upto them) blip the throttle a few times and it sometimes goes back to normal idle.

why is it doin this?? its VERY annoying, ive even swapped the idle position sensor and still had the same problem.

also say im just driving down the road, it will even splutter (like its out of fuel?) nd have no response on throttle. then as im trying to accelerate in gear (while still doin speed limit, slowly gettin slower) it sounds like it misfires. sometimes this goes on for 5 mins and i cant even drive it, and other times its over in 10 seconds? then back to prefectly normal.

even if you hold your foot in the same spot on the accelerator pedal, it will cut out, accelerate, cut out etc..

i seriously have no idea whats wrong with it.. fuel pump? something to do with idle control? but that wont help the problem while at speed? it could be 2 different problems.

if anyone could help that would be GREATLY appreciated

Cheers.

Also check the cam angle sensor, you can just unbolt it and have a look. Mine had broken teeth causing this, replaced with $100 second hand CAS and worked fine.

^ When I changed the turbos it started fine, misfired after 20 mins, started feeling like you were turning the ignition on/off etc. I checked afm's, cleaned injectors, filter, ignition module, etc. Replaced the CAS with a mates, still no go, changed back to mine, worked fine. Turned out the plug for the CAS just needed a wiggle/twist. Dunno if your prob is the same but,

Coils: I'd unplug one coil to see if it sounds different/makes it worse. Check each coil, takes but a few mins.

AFM: I'd simply get AFM cleaner and clean it anyways, if it's the stock one. Few bucks, worth it.

CAS: Wiggle the plug/Unplug and reseat. Borrow one from a friend before spending money on replacement.

Fuel Filter: Cheap, but nasty to replace if you have big hands.

Plugs: How old?

cheers guys, its hard to diagnose cos its not always happening, just sometimes desides to do it.

wiggled/unplugged the CAS - same

its not the coils either, checked them

plugs are probly due for a change, but that would make it run shit all the time? or not?

but when i un-plugged the AFM it started to run shitty, exactly like the problem i explained above.. then after a few seconds it regains idle but wont rev over a few thousand revs, (not crisp anyway)

is there any sort of tests for AFM?? to see if they working correctly? or faulty?

thanks, will try to find an igniter and see how it goes.

but how do you know if the AFMs are dodgy? any way of telling? or just have to swap nd see?

just swapped the AFMs with another working pair from another GTR, seems to be working perfectly fine atm.

hopefully this is the problem! nothing worse than not knowing what the hell is wrong, hate guess work haha

need to find a set of AFMs now, or find out which one was faulty if not both.

thanks alot guys!

Cheers.

just swapped the AFMs with another working pair from another GTR, seems to be working perfectly fine atm.

hopefully this is the problem! nothing worse than not knowing what the hell is wrong, hate guess work haha

need to find a set of AFMs now, or find out which one was faulty if not both.

thanks alot guys!

Cheers.

Id replace both. If you do try to buy a set of nismo ones, they are more expensive but have the same characteristics of a Z32 meter which is good if you make some more serious mods to the motor.

Yeh I was looking at some nismo ones, still not sure yet.. Either quick and cheaper fix with STD ones or upgrade to z32 or nismo and get it re tuned. I do wana upgrade the engine later down the track tho, but my pockets arnt deep enough at the moment hah

May go for the cheap fix first then upgrade a bit later on

Cheers mate

fair enough.. looks serious! haha

i just got HKS pods, lookin to change to the Apexi setup.. will get onto nismo ones soon!

but in the meantime will std AFMs from a Aus delivered GTR work on an imported GTR? i was just wondering if they are diff?? probs a stupid question but am just curious?

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...