Jump to content
SAU Community

Recommended Posts

hey guys, i have a r32 gtr which has been running a bit weird latetly.

at first it was occasionally about once a week, but now its getting more common, like at least everytime i drive it.

cold mornings its fine, once it starts warming up is when the problem occurs.

i first noticed it when i parked my car, let the turbo timer do its thing then just as i was walking away it started spluttering at idle, did that for 5 seconds then regained normal idle. it also did this while waiting at a set of traffice lights (even while i was rolling upto them) blip the throttle a few times and it sometimes goes back to normal idle.

why is it doin this?? its VERY annoying, ive even swapped the idle position sensor and still had the same problem.

also say im just driving down the road, it will even splutter (like its out of fuel?) nd have no response on throttle. then as im trying to accelerate in gear (while still doin speed limit, slowly gettin slower) it sounds like it misfires. sometimes this goes on for 5 mins and i cant even drive it, and other times its over in 10 seconds? then back to prefectly normal.

even if you hold your foot in the same spot on the accelerator pedal, it will cut out, accelerate, cut out etc..

i seriously have no idea whats wrong with it.. fuel pump? something to do with idle control? but that wont help the problem while at speed? it could be 2 different problems.

if anyone could help that would be GREATLY appreciated

Cheers.

Also check the cam angle sensor, you can just unbolt it and have a look. Mine had broken teeth causing this, replaced with $100 second hand CAS and worked fine.

^ When I changed the turbos it started fine, misfired after 20 mins, started feeling like you were turning the ignition on/off etc. I checked afm's, cleaned injectors, filter, ignition module, etc. Replaced the CAS with a mates, still no go, changed back to mine, worked fine. Turned out the plug for the CAS just needed a wiggle/twist. Dunno if your prob is the same but,

Coils: I'd unplug one coil to see if it sounds different/makes it worse. Check each coil, takes but a few mins.

AFM: I'd simply get AFM cleaner and clean it anyways, if it's the stock one. Few bucks, worth it.

CAS: Wiggle the plug/Unplug and reseat. Borrow one from a friend before spending money on replacement.

Fuel Filter: Cheap, but nasty to replace if you have big hands.

Plugs: How old?

cheers guys, its hard to diagnose cos its not always happening, just sometimes desides to do it.

wiggled/unplugged the CAS - same

its not the coils either, checked them

plugs are probly due for a change, but that would make it run shit all the time? or not?

but when i un-plugged the AFM it started to run shitty, exactly like the problem i explained above.. then after a few seconds it regains idle but wont rev over a few thousand revs, (not crisp anyway)

is there any sort of tests for AFM?? to see if they working correctly? or faulty?

thanks, will try to find an igniter and see how it goes.

but how do you know if the AFMs are dodgy? any way of telling? or just have to swap nd see?

just swapped the AFMs with another working pair from another GTR, seems to be working perfectly fine atm.

hopefully this is the problem! nothing worse than not knowing what the hell is wrong, hate guess work haha

need to find a set of AFMs now, or find out which one was faulty if not both.

thanks alot guys!

Cheers.

just swapped the AFMs with another working pair from another GTR, seems to be working perfectly fine atm.

hopefully this is the problem! nothing worse than not knowing what the hell is wrong, hate guess work haha

need to find a set of AFMs now, or find out which one was faulty if not both.

thanks alot guys!

Cheers.

Id replace both. If you do try to buy a set of nismo ones, they are more expensive but have the same characteristics of a Z32 meter which is good if you make some more serious mods to the motor.

Yeh I was looking at some nismo ones, still not sure yet.. Either quick and cheaper fix with STD ones or upgrade to z32 or nismo and get it re tuned. I do wana upgrade the engine later down the track tho, but my pockets arnt deep enough at the moment hah

May go for the cheap fix first then upgrade a bit later on

Cheers mate

fair enough.. looks serious! haha

i just got HKS pods, lookin to change to the Apexi setup.. will get onto nismo ones soon!

but in the meantime will std AFMs from a Aus delivered GTR work on an imported GTR? i was just wondering if they are diff?? probs a stupid question but am just curious?

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...