Jump to content
SAU Community

Recommended Posts

Hi everyone,

My brake discs and pads are getting changed in next service (96,000kms or 3 months time) and thought of changing to Brembo's or aftermarket's instead of stock ones.

I just want to know how you feel about them and the price. I am looking at spending about $1000 - $1500.

Any suggestions and experiences are much appreciated.

Thank you.

Link to comment
https://www.sau.com.au/forums/topic/342293-brake-combo-for-2004-v35-coupe/
Share on other sites

Hi everyone,

My brake discs and pads are getting changed in next service (96,000kms or 3 months time) and thought of changing to Brembo's or aftermarket's instead of stock ones.

I just want to know how you feel about them and the price. I am looking at spending about $1000 - $1500.

Any suggestions and experiences are much appreciated.

Thank you.

hey victor, for the price range your looking at brembos will have to be out of the question. you may be able to find one eg calipers etc but the dics or pads will prob be worn at that price. why not pm rs73? those rdas and greenstuff arent that bad and willl cost less than $1k. if you cant change them yourself, allow $250-$350 for installation.

edit/ also ive read somewhere before that the difference between the brembos and stock brakes isnt that massive. brembos are slightly better. if you're going to head to high hps/kws and taking it to the tracks then brembos or other aftermarket bbk is a must...however = more $. if you can find the new akebono? v36 brakes then that'll be awesome as ive heard good reviews about them.

either way if your cars just for a daily/w.e car then i suggest buying one of rianto.

Edited by xtc

My advice is stick to stock. Since u not tracking ur car nd u only use it as a weekend car.also u not gonna turbo or supercharge. So it wudnt seem worth it for u. If u realy wana upgrade then go for it.

you probably wont get much more from the brembo brakes on the street, but on the track they will offer much more thermal capacity and consistency. it really depends on what you want to do with the car.

+1 for RDA rotors. I havent used greenstuff pads before, but heard good things. Im a big Project Mu fan, for brakes.

are you referring to just the standard replacement disks made by brembo (for normal caliper)?? If so, you can get them from the US and it's still cheaper after postage. Don't know if there's significant improvement over stock rotors.

hey victor, for the price range your looking at brembos will have to be out of the question. you may be able to find one eg calipers etc but the dics or pads will prob be worn at that price. why not pm rs73? those rdas and greenstuff arent that bad and willl cost less than $1k. if you cant change them yourself, allow $250-$350 for installation.

edit/ also ive read somewhere before that the difference between the brembos and stock brakes isnt that massive. brembos are slightly better. if you're going to head to high hps/kws and taking it to the tracks then brembos or other aftermarket bbk is a must...however = more $. if you can find the new akebono? v36 brakes then that'll be awesome as ive heard good reviews about them.

either way if your cars just for a daily/w.e car then i suggest buying one of rianto.

Right, I will pm rs73 about that and see how much it will cost me.

Did you mean RDA's or DBA's? How about I use different discs/pads with Brembo calipers?

:P see how much us wa boys love you man? ill tell you what...spend the $1k from rianto and fitting. the other $500 you can spend of us for beers, snacks etc on next meet and greet. oh and the good advice. Edited by xtc
My advice is stick to stock. Since u not tracking ur car nd u only use it as a weekend car.also u not gonna turbo or supercharge. So it wudnt seem worth it for u. If u realy wana upgrade then go for it.

If stock and aftermarket are just $100 - $200 different per item, I just thought of having slotted or cross drilled instead of direct replacements for a change.

Good for the looks too. :P

:D see how much us wa boys love you man? ill tell you what...spend the $1k from rianto and fitting. the other $500 you can spend of us for beers, snacks etc on next meet and greet. oh and the good advice.

Haha. Lots of love, my man. :P

With using different discs/pads with Brembo calipers, I want to do Brembo brakes conversion on an auto V35 coupe, plus it will look good with red brake calipers & gold rims on white car. :P

In saying that, anybody knows if there is going to be issues if I go ahead and use different discs/pads with Brembo calipers?

Edited by Victor.T
you probably wont get much more from the brembo brakes on the street, but on the track they will offer much more thermal capacity and consistency. it really depends on what you want to do with the car.

+1 for RDA rotors. I havent used greenstuff pads before, but heard good things. Im a big Project Mu fan, for brakes.

Yeah, I am also a big Project Mu fan too (Always drowl over looking at Project Mu brakes on L8RSKY's coupe). But that's going to set me back around $5000 - $6000. :P

Edited by Victor.T
Haha. Lots of love, my man. :P

With using different discs/pads with Brembo calipers, I want to do Brembo brakes conversion on an auto V35 coupe, plus it will look good with red brake calipers & gold rims on white car. :D

In saying that, anybody knows if there is going to be issues if I go ahead and use different discs/pads with Brembo calipers?

the brembos on vs arent red they are gold. so are the 350z. if your looking for red then aftermarket ones will cost in excess of $5k

If stock and aftermarket are just $100 - $200 different per item, I just thought of having slotted or cross drilled instead of direct replacements for a change.

Good for the looks too. :P

dont go cross drilled. if you want to replace your rotors with stock or similar then slotted just gives that slight of a better stopping power and less heat.

Lol i knew he jus wanted those red calipers.haha. u can get cheap copies off ebay.

Anyways my brakes need to b changed was quotted 500 by nick at fabcar.oda places quotted me round 700. Have u spoken to him yet?

the brembos on vs arent red they are gold. so are the 350z. if your looking for red then aftermarket ones will cost in excess of $5k

Ok, I thought they were red.

Anyhow, I might also ask Fabcar to quote me a price on full set of Brembo as well, and compare the price with other products.

Yeah, I am also a big Project Mu fan too (Always drowl over looking at Project Mu brakes on L8RSKY's coupe). But that's going to set me back around $5000 - $6000. ;)

Project Mu make factory pad sizes in several types of friction material compounds. their 2 piece rotors ARE exy, but well worth it

ive combined RDA slotted rotors with project mu pads (NR and NS) and they were effing awesome. so much so that ive done it again with my stagea. i hope they arrive next week!

Lol i knew he jus wanted those red calipers.haha. u can get cheap copies off ebay.

Anyways my brakes need to b changed was quotted 500 by nick at fabcar.oda places quotted me round 700. Have u spoken to him yet?

Haha, yeah. Just another mod to do.

Yes, Nick told me that I need to change brakes/discs at next service and said $500 for slotted discs (I don't know if that's for just fronts or full set).

I just want to know other options. ;)

Edited by Victor.T
Project Mu make factory pad sizes in several types of friction material compounds. their 2 piece rotors ARE exy, but well worth it

ive combined RDA slotted rotors with project mu pads (NR and NS) and they were effing awesome. so much so that ive done it again with my stagea. i hope they arrive next week!

That's great. Is there any noise issues?

That's great. Is there any noise issues?

when they were hot the NRs made some noises, and dust was a bit of an issue. but they bit hard every time. this was on my S15s. they didnt squeal if thats what youre worried about?

This time ive gone for a lower temp pad because i wont be pushing the stagea as hard. there is a local seller too which is handy. Prices are pretty good IMO.

www.project-mu.com.au

if youre sticking with stock rotors, the series two V35s have larger brakes.

no i dont work there lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...