Jump to content
SAU Community

Recommended Posts

I have front and rear seats for an R34 GT-T that I tried selling on Ebay however had no bids. I originally purchased the seats from a bloke that had a R34 when it was only 11 months old for 800.00. I'm either looking to sell the seats (looking at getting at least 600.00) or swapping them for a very clean set of R33 GTS/ GTS-T seats??? plus 200.00 on top. This is a very good deal and if any Melbourne dudes are interested please E-mail on [email protected] or call 0413 606 469. Please Note: The photo shown is the same photo is used when advertising the seats on Ebay, it is not of the actual seats however the actual seats are totally identical in every way.

Link to comment
https://www.sau.com.au/forums/topic/34233-nissan-skyline-r34-gt-t-seats/
Share on other sites

there you go, here are the photos, as per the add, the photo shown is the same photo I used when advertising the seats on Ebay, it is not of the actual seats however the actual seats are totally identical in every way. Also (HKSgtst & Denton R33) re the fitting of the seats, I have an R33 sedan which has a different floor pan to the coupe, so the bolt straight into a coupe - they do not fit into R34 GTR's though (coupes or sedans) as they have different floor pans. At the end of the day, if they dont fit then there's no deal. Also I'm happy to do the deal with SII seats provided the rail set up is the same as SI, if you want to further discuss please call, or if you Email to [email protected] I cannot respond til tomorrow as I cannot reply to E-mails from home (just the office).

ok everyone - here's the verdict... R34 GT-T seats look absolutely crazy in an R33 coupe. I have taken digital photos of my friends R33 GTS-T with the R34 GT-T rear seat fitted along with the sides, parcel shelf and floor pan. They look nuts and go very well with the black trims. All bolts and holes fit and line up aswell.

Bad news all, R33 coupe rear seats dont fit in R33 sedans - unfortunately I cannot trade. I'm having the R34 GT-T seats modified (highly modified) so they can be fitted in my sedan. If anyone is interested in seeing the end result let us know.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...