Jump to content
SAU Community

Recommended Posts

If you're referring to the rich and retard limp mode the engine goes into some times then the temps are lower because the fuel mix is richer.

But if you're strictly talking about timing, i doubt it'd make much difference. The fuel is ignited slightly earlier in the piston cycle with advanced timing so the explosion has slightly longer to combust which means slightly more heat will go into the engine. Also having the explosion in a smaller space (the point of advancing timing) will mean the air-fuel mix will be more compressed and transfer the heat better to the metal, and the explosion will be more violent due to the small space (high pressure) and take less time adding to the heating of the engine. But giving the small changes usually made in changing timing it probably wouldn't make much difference.

I can't imagine any of these would play anywhere near as much of a role in engine temperature as air fuel ratios though.

This is in relation to exhaust temperatures. The further you retard the timing, the hotter the combusted mixture is when it leaves the cylinder. Think of it in extremes - if you retarded the ign timing so far that it was igniting the mixture just as the exhaust valve opened, you would have the mixture burning straight out the manifold. This would be bad.

This is in relation to exhaust temperatures. The further you retard the timing, the hotter the combusted mixture is when it leaves the cylinder. Think of it in extremes - if you retarded the ign timing so far that it was igniting the mixture just as the exhaust valve opened, you would have the mixture burning straight out the manifold. This would be bad.

that would be an anti-lag system

Antilag just doesn't spark at all I believe. It allows unburnt air/fuel mixture to leave the cylinder, which ends up ingniting in the manifold, and spools the turbo significantly. This gas also has a negative effect on the life of the turbo, as it's making it a lot hotter than it normally would be.

If you're correct Marc, and antilag is simple extremely retarded timing, then my point still stands - it's not good for the turbo lol

yeah i think you are right about the lack of spark ignition, but yeah the principle is pretty much the same.

i think that in normal conditions though, the retardation of the timing by 1 or 2 degrees is going to have a very minimal effect on EGT's.

yeah that small is nothing.

I remember speaking to my tuner when I was having my car finished up just the other week...he was saying about the measures they took to keep the max power DOWN, by retarding the timing up top. He then went on to explain that they could only do this so far, until the exhaust temps got too hot...I love it when you don't even need to pick a mechanic's brain for him to feed you with good information as they just tell you everything anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
×
×
  • Create New...