Jump to content
SAU Community

Un-solved Miss Fire !!!

cameron

By cameron,
in Engines & Forced Induction

 Share

Recommended Posts

cameron Mentor

cameron

Posted
Posted

Hey,

got a 95 Gtst with standard boost and the usuall front mount, exhaust, pod etc:

any way we have a bad missfire, changed plugs, gaps, coils and it still occurs :cheers:

this is what its like.

turn the car on works fine go for drive and so on. then turn car off and go for lunch and so on then come back and turn it back on it has a weird sort of idle it will gurgle and surg intill you give it a bit of throttle then it'll idle fine ? any way off we go then it will start missing some times at 3k and sometimes at 4krpm and it wont go over it, cause it was that bad. sometimes it'll have a little miss at about 4krpm then it'll pull to redline. other times it'll just work fine and not miss at all ??? it does this in all gears and even in neutral, doesnt matter how much throttle you give it even if you ease it on of put it flat it'll still miss bad.

last month we had it missing really bad (on empty tank fuel) we had the bonnet up looking for leaks and reved it up it was missing then all of a sudden a huge bang(back fire)!!!! their was smoke everywere (white) it sounded like a gun shoot. it did that twice intill we went to the survo and put some petrol in it.... it worked fine after that didnt miss intill later on maby about 1 or 2hr's later it started missing again? Got some new NGK double platnim iridium tips in their and pulled plug number 6 out and it had a crack in it, it was black too.... and their only been their 3 weeks ??? the rest were fine.

what could this be ? were are using an avc-r boost controller and it does it even if its off or on....

thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/34256-un-solved-miss-fire/
Share on other sites
cameron Mentor

cameron

Posted
  • Author
Posted

its not the air flow meter because we have tried another one and it still misses....

today its doing its really bad its missing when its ideling and it was running on 5 cylinders but then their was no miss through the rpm ? but then it started mising through rpm and it ram on 6 cylinders again ? weird.... it stalls a lot too when you push the clutch in 3rd or 4th gear and take your foot off the accelerator, the rpm just goes down to zero intill you take your foot off the clutch then it jump starts it self !!!

hope you guys can come up with some answer cause its gettings quiet frustrating..... :D

cheers,

Cameron

predator Grand Master

predator

Posted
Posted

errr... sounds like its detonating like a m/**er.. um, do you have any compression in cylinder #6 at all? you might want to check that little thing :D

Cracked spark plug? thats not good at all! I wouldn't be driving it like that at all, sounds like serious problems with cylinder 6 cap'in. May already be too late...

cameron Mentor

cameron

Posted
  • Author
Posted

when we took the turbo off all the coolent drained out of the water line and it was fine.. maby a little bit of oil not much though.

we just took the air flow meter wires off and replaced them because they have been dogyed up with wires sticking out everwere.. and it wont start now... but when we unpluged it, it starts ??? but wont rev over a certain point :P

can anyone help ?

Thanks,

Cameron :)

predator Grand Master

predator

Posted
Posted

well sounds like you've screwed up the AFM rewiring then. Check again.

Without an AFM it will start fine, just when you go to open loop mode over about 2500rpm it will refuse to rev past that without a correct AFM signal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ozdavroz
      Starting again

      By Ozdavroz · Posted

      Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Duncan
      New R32 owner soon

      By Duncan · Posted

      Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • bardabe
      1992 R32 GT-R Race Car

      By bardabe · Posted

      I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • Kapr
      Oil pan for RB25DET NEO Stagea "version"

      By Kapr · Posted

      So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Rezz
      New R32 owner soon

      By Rezz · Posted

      Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...