Jump to content
SAU Community

Recommended Posts

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by adam 32

but hold on theres other guys here in perth with skylines making over 300rwhp and they cant break 13.5...... how the hell did a 315rwhp 1500kg rwd car run a 12.5????

Actually it weighs 1650kgs as raced, and I can assure you the times are genuine. I ran two 12.5's and two passes in excess of 116mph!:) My brothers Zed ran 13.8 at 106mph with second gear clutches in his auto TOTALLY fried!

I've heard about Geoff Risby's Zed, he imported it with those mods didn't he?

Skyline owners are always sceptical about Zed's cause they've been indoctrinated with the gospel according to HPI/Zoom, who go out of their way to bag Zed's:(

No slicks.....245/45/16 Falken FK451's, which are great on the street, but crap on a drag strip. I didn't get any better than 2.09 60' which is terrible for an auto, with slicks it will do 1.8's easy and will run 12.2 - 12.3:)

Remember, this is a full weight, stock turbo, stock ECU, stock intercoolers, stock auto, street tyred Zed:)

Originally posted by skyzerr33

yeah kymbo lets see the 18 sec pass of the sonata

funny enough... i didnt keep any timeslips from it hey.... i never even knew they were "free" to go and collect...

and it wasnt 18sec! :)

what's wrong with a 17??

Geoff told me that traction wasnot an issue where as holding boost off the line was. His terminal has ~181kph.

P.S. I could get my GTR to do less than the mid 12 you speak of for less than $2000, however power will probably be down on what a 12.5 sec Z has.

13.038 @ 168.48kph.

All I have is a full exhaust, Teins (which are probably of questionable benefit on the strip) and an ECU without a speed cut and tuned for 100ron fuel. Ohh and I also run 245' Falken FK451's.

if you don't believe that the TTZ ran 12.5 than once again check out the www.drivelinechatter.com website and talk to people there as like i said before most of them were there and saw it run those times! as for the GTR running 12's that may be so but all the stock gtr's or slightly modded gtr's i have seen race run slower than what u have!

Originally posted by Rhino

Geoff told me that traction wasnot an issue where as holding boost off the line was. His terminal has ~181kph.

P.S. I could get my GTR to do less than the mid 12 you speak of for less than $2000, however power will probably be down on what a 12.5 sec Z has.

13.038 @ 168.48kph.

All I have is a full exhaust, Teins (which are probably of questionable benefit on the strip) and an ECU without a speed cut and tuned for 100ron fuel. Ohh and I also run 245' Falken FK451's.

I have no doubt whatsoever that you could, I personally havn't seen any relatively stock GTR's run those times, but then again, I havn't seen any Zed's run 12's either.

If we're gonna have a pissing contest, My Zed ran a 12.86 in Aug 2001 with NOTHING more than a cat-back exhaust, HKS filter and 14psi boost:)

As for timeslips, if you don't believe me...........who cares?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...