Jump to content
SAU Community

32 Gtr Parts - Near New Brakes/rotors/braided Lines, Nismo Pump, Diff, Cv Shafts, Drivers Guard, Hubs

Angus Smart
 Share

Recommended Posts

Angus Smart Grand Master

Angus Smart

Posted
Posted

Its almost a bare shell now, so only really whats under is left.

Complete brakes has near new rotors, braided lines - $650

Nismo fuel pump near new also- $330

Stock gtr diff $500

Cv shafts, front $150 rear $150 for pairs

Gearbox as advertised in other thread! $800

Steering wheel, good Condition with horn $200

Have a greddy oil cooler kit/remote filter has a puncture in one of the lines wouldnt cost too much to fix $250 about 1.5m of braided line is about 40 per m

Have the Hubs also for your 5 stud conversions along with sub frames also. $400 for the lot.

Glass from the rear 1/4's $50 each

Rear glass $100 pick up only on this!

Drivers side guard. good condition $200

Aexi power fc, $600 no hand controller

Complete whiteline bushes throughout also will take $200 for all. including all arms they are in.

Can Courier all items unless otherwise stated.

All items are located in SOUTH WEST SYDNEY!

I still have motor gearbox clutch and a few other bits all for sale see links below!

SeekersPowerbuild Apprentice

SeekersPowerbuild

Posted
Posted

Keen on the oil cooler kit,please call or text me on 045 888 6668 if you still got it for sale. can pick up anytime.

thanks

Have a greddy oil cooler kit/remote filter has a puncture in one of the lines wouldnt cost too much to fix $250 about 1.5m of braided line is about 40 per m

Angus Smart Grand Master

Angus Smart

Posted
  • Author
Posted

Will get wheel photos done soon, plenty of interest in him!

rear hubs and knuckles are sold also, pending me getting them out!

  • 3 weeks later...
krayzie32 Mentor

krayzie32

Posted
Posted

Is pump still available??

Will it fit an R32 GTR???

Also Near new you reckon??? More info...

How kms??

  • 2 months later...
Angus Smart Grand Master

Angus Smart

Posted
  • Author
Posted

Still have whiteline bushes and camber arm kit.. front and rear + subframe bushes $150 firmmm

Also still have front hubs. good for 5 stud conversion.. $50

And Good perfect condition Gearbox, no grinds crunches etc price drop to $600

A few other random bits and pieces too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...