Jump to content
SAU Community

Recommended Posts

Hey, I was wondering how much it'd cost to paint a bumper, rear or front. Like i've seen cheap modded bumpers on eBay and places like that, but they still need to be primered and painted. Is it hard to find a place that has the specifc paint, like the car's paint has faded a bit and i wanted it matching that.

Also a complete paint job, are there any decent places in NSW that would do it cheap, e.g under 1k?

(skyline r33)

And lastly I wanted to know about a side vinyl, i wanted a vinyl/decal/graphic along the side of the car, but a really large one, covering the entire side, over the door and front and rear side panels of the car. How much would that set me back? And again, any cheap places in NSW?

Thanks in advance.

any paint panel shop worth there salt will paint match fairly accuratley for you.

a full respray under 1k, unless its a can job or backyardy and your good mates its a NO.. if u do prepwork painting will be cheaper but stil not likely a 1k

the vinyl that'll cost you nothing, i say that cos its super ghey and for your own credibility i dont recommend doing it unless its for business purposes.

having said all that im from melb so maybe stuff is cheaper in nsw... good luck anyways

Alright, forget the paint job i guess. What about painting the bumper/body kit myself at home?

and for the vinyl, i want it across the side of the car, really large.. it'll cover a few paint blemishes too. but yeah, anyone know of a cheap place in NSW for it?

  • 2 weeks later...

hey man i bought a black front bar for my 32 and resprayed it to match my maroon.. i was actually really suprised how good it looks.. if its the same color as ur car then youl just wana sand it back a bit 180-400

grit then get ur paint code and get somewhr like autobarn to mix u up some spray cans i used about 4... but that was from white and get a couple cans of topcoat clear unless your pretty mch inspecting it youd never tell the difference :thumbsup: hope this helps!

simon

if you don't have a compressor and a spray gun, then the bumper at home is a waste of time. any panel shop will be able to do it for a few hundred bucks and have it matched to your car pretty well. i had 3/4 of the car painted by a mate who's a panel beater and only in certain light at certain angles can you tell the difference, and that is only because the painted panel is sitting right next to an original panel (door to roof) and you can just tell that the roof is more faded, but that will be getting done in the future since the clear is starting to lift in 1 small spot.

I design and produce vinyl graphics for street, track & race cars, and not crappy off the shelf type stuff, this is full custom designed to suit the style of the car and owner...

www.metal-ink.net

generally though if your after cheap, it will look cheap... do it once do it right...

The trick is to get as much painted together at the same time as possible - as it would be cheaper for the panel beater to buy paint and do it in one hit.

In general, getting both the front and rear bars painted and fitted would not cost over $1K.

In regard to the stickers or body vinyls as some may call it, I personally suggest you stay away from them, but if you like that sort of look, it would cost around $400 plus labour at some rate to get it done. I wouldn't pay more than $500.

There's nothing wrong with Ebay bodykits, but just make sure you do your research and read the sellers feedback, as you'd get a good feel of how a seller does soon.

Good luck..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
    • I haven’t yet cut the chassis, maybe I switch to a reverse flow. I’ve got the Intercooler mounted as I already had it but not cut yet. Might have to speak to an engineer 
    • Yes that’s another issue, I always have a front mount, plus will be turbo plus intake will big hasstle. I’ve been told if it looks stock they’re fine with it by a couple others who have done it ahahaha.    I know @Kinkstaah said the stock gtt airbox is limiting but I might just have to do that to avoid a defect so it atleast looks legit. Or an enclosed pod so it’s hidden away and feed air from the snorkel and below Intercooler holes like kinstaah mentioned. Hmm what to do 
×
×
  • Create New...