Jump to content
SAU Community

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Ok, So far we have 3 people, dont we?

SkylineDave = K578M865 $1000

Mesmer = K578M865??? (Or not involved anymore?) $1000

Mesmers freind SR20 Kit = K557M865 $950

If you guys are definate, please send me a email to [email protected] with the following details:

Name:

Address:

State:

Post Code:

Contact number:

Kit Number Requierd:

I want to try and organise the cut-off date for end of this week (Friday) if possable.

Cheers,

Trev

Hi Inasnt,

Havent seen you for a while!? ;)

Naa cant get rods just yet, I might organise a group buy of Pauter Rods later on this month though... so i will keep you posted.

Also i will be organising this group to end on friday.

only Dave has responded so far, if theres anyone else drop me a email.

Cheers,

Trev

Around 2 weeks...And just for piece of mind, i track the parcel a week after it has left just to be sure everything is on track. (And notify you guys)

If Dave is happy to wait around until your ready, thats fine by me...?

Perhapes you guys can work a date out, and get back to me.

Cheers,

Trev

  • 2 weeks later...

Hey Im after a set of forgies for my Rb30/25 conversion whats happening with the order. Let me know. Ive been in touch with the people at rocket who stock the Aries forged pistons and they need both hands to find their own asses. I spoke to three different guys and got three different prices from $1047 to $1205 and they said theyed be in next week , early April maybe ??? Making further enquires the Aries pistons tend to have failure problems after 24 lbs boost ??? Jnr24 what kind of rings do the Weiscos come with are the ductile iron or chromemolly ? Im pretty keen to move on these if they are the right ones as my Rb 25 is on it s last legs. I got just about every thing else ready to go and the pistons are holding me up !

Thanks Dude

Ok All,

Cut-off date is this coming FRIDAY (19th of March) if you are unavialable to make this buy then you will have to buy individualy. Please respond ASAP, the AUD vs USD has changed heapes since my last post and i have to advise of any new price changes. (If there is any, this will be determined, by the amount of people that buy, rates, shipping cost etc...)

For all that can make this date you must Have the money Xferd over by friday the latest. please send me a email with the following details:

NAME:

ADDRESS:

STATE:

POST CODE:

CONTACT NUMBER:

WISECO KIT NUMBER YOU REQUIER:

On thursday i will post the final price for all involved in the group buy.

Cheers,

Trev

Trev;

Ive noticed some discrepencies in the Wiseco cattle dog In the Rb30 section the rod length in inches is wrong(if you divide the mm rod length into inches you get a different number) But the most concerning thing is in the Rb 25 section where the dome volume is stated as 14(I assume cc's) but if you look at the note at the extreme right the kit number is coded with a 1,2 notes number. If you go to the very bottom of the page you'll see the 1 coding is of not much concern but the 2 coding states that the piston is a flatop with no flycuts for the valves???? That aint gonna work. Any chance you can email them for clarifcation ?

Let us know

Peter

Hey Peter,

My engine builder has built a few of these RB30DET's using the wiseco RB25DET pistons (K578M865) is the kit number.

The last engine he built made 470hp@wheels with a GT30 turbo. To me it looks like they work :P

-Dave-

Dave your alive! :P

Allthough he has used these pistons in a RB30, did it have a RB25 head?

If you dont mind me asking, can you PM me you engine builders number? I just need to talk to someone who has used these pistons.

P.S Are you in for this friday?

Cheers dave,

Trev

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...