Jump to content
SAU Community

Recommended Posts

Hey mate, questions:

1. With this bare RB25 head, can you install standard RB25 Cams back into it or is it too modified for GTR bits?

2. Has the head been ported?

3. Do you still have the GTR TB's?

I'm interested.

Thanks

Jono

Hey mate, questions:

1. With this bare RB25 head, can you install standard RB25 Cams back into it or is it too modified for GTR bits?

2. Has the head been ported?

3. Do you still have the GTR TB's?

I'm interested.

Thanks

Jono

1. yes its a bare head and the standard rb25 VCT stuff can go back in it, only thing that needs replacing is the exhaust guides (hi octane sell them) and there was a bung put in the oil drain on the face side as it was going to go on a rb30 block easy heat up and remove

2. yes its been ported the flow figures are on the previous page XXX Cubic feet per minute @ XXX amount of lift in inches

3. yes still have the ITB

Hey mate, keen on the T306 timing belt. I'll give you $30 inc post if you can put it in an express bag tomorrow for the weekend?

I can DD the money and send recpeipt (though it'l probably take ~24 hours for the $$ to clear pending your bank...)

Cheers,

-Dan

  • 4 weeks later...

Since I cant update the first post here is whats still for sale

Below is a list of a whole lot of crap that I have no need for anymore, if its not listed then i dont have it for sale

R33 RB25 Stuff

Part: R33 RB25 VCT cylinder head

Condition: Reconditioned, was going to convert to rb26 valve train to put on a RB30 bottom end

Description: Head is bare, Needs Exhaust guides and surface grind and assembly, has Been acid bathed, bead blasted, flow bench ported, Valve seats have been cut to suit a 1mm oversized valve and have been cut with a CNC seat cutter (usual 30deg crown 45deg seat and 70 deg throat and seat blended into the port) its had a bung/ grub screw tapped and fitted to the VCT oil drain, and has been cut out with a die grinder to suit bigger cams

Asking Price: $450

Picture-0113.jpg

Picture-0114.jpg

Picture-0115.jpg

Picture-0116.jpg

Picture-0117.jpg

Part: R33 RB25 VCT Cams

Condition: Used, standard, still has VCT thingy on intake cam

Description: stock, VCT, thats about it i guess

Asking Price: $20

Picture-0109.jpg

Part: R33 RB25 Cam covers & Coil pack cover

Condition: Used but clean

Description: Acid bathed, bead blasted, repainted black, coil pack cover un painted

Asking Price: $50

Part: R33 RB25 upper plennum & throttle body

Condition: Used

Description: Perfect for someone looking to cut and shut to make a twin throttle body RB25 manifold

Asking Price: $10

Picture-0110.jpg

Part: R33 RB25 Intake manifold

Condition: Half Modified

Description: RB25 intake manifold was going to modify it to suit the rb26 ITB but didnt happen. All that is needed now is the plates to be welded on drill bolt holes and done

Asking Price: $50

Picture-0107.jpg

R33 GTR RB26 Stuff

Part: RB26 ITB

Condition: used

Description: 6 independant throttle bodies and the linkages, nothing else

Asking Price: $80

Picture-0106.jpg

RB30/ R31 Stuff

Part: RB30 Head (with manifold and injectors)

Condition: dirty used

Description: 6 cylinder 2 valve, blown head gasket on the block side from #4 cylinder into the oil (pressurising the oil) other then that head has been lightly ported (de dagged and smoothed out) standard cam and factory standard lifter housing

Asking Price: $50

Part: Standard balanced flywheel

Condition: Used

Description: Done about 15,000kms, was balanced before, bit of wear but didnt have any clutch issues before removing, was used with a heavy duty clutch

Asking Price: $20

Picture-0104.jpg

Part: rb30 reground cam

Condition: used

Description: Standard cam reground to, 261deg duration cant remember the lift, need to chip the ecu, and have 0.030" (0.8mm) ground off the lifter houseing

Asking Price: $40

Picture-0105.jpg

Part: R31-RB30 Standard harmonic Balancer

Condition: Used

Description: its a harmonic balancer... alternator/water pump, air con, power steering belts, one piece,

Asking Price: $10

Picture-0112.jpg

Part: R31/RB30 Extractors

Condition: Used

Description: 3-2-1 pipes, press bent, mild steel

Asking Price: $70

Picture-0102.jpg

Part: R31 dash skin, drivers side head light drivers side guard standard bumper

Condition: used

Description: dash skin is brown, head light works fine, guard is grey, bumper tried sometwhing and now it may only be good to make a flip lip

Asking Price: $10 each

Picture-0103.jpg

Location: Fairfield Sydney NSW

Contact Details: Via PM (serious buyers will receive number through there)

Pick-up/Postage Arrangements: rarely get to a post office during work hours so postage may be a bitch, pick up arrangements will be made in details through PM's

Other Comments: this crap is going as is, its not an urgent sale, and everything is pretty cheap, dont need any other parts so no swap

  • 4 weeks later...
  • 2 months later...

still for sale

R33 RB25 vct head (still needs valve guides)

RB25 VCT Cams

RB25 Cam & valley covers

RB25 Upper plenum and TB

RB30 Cylinder head (with standard cam and light porting)

RB30 Reground cam

RB30 Extractors

RB30 Flywheel

R31 misc crap

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...