Jump to content
SAU Community

Recommended Posts

Price: $450 pick up ( http://www.nengun.com/hks/stainless-front-pipe-gtr )

Location: Brisbane South

Condition: Excellent except for a small scratch at the "dip" after the pipe split into 2.

Reason for selling: no use as going back to stock.

Very solid piece of pipe with perfect workmanship (welding). Ashame to sell it but have no use for it since I'm not thirsty for more power.

post-42920-1289717848_thumb.jpg

post-42920-1289717861_thumb.jpg

post-42920-1289717872_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/344251-hks-front-pipe-for-rb26/
Share on other sites

Do you willing to ship to Malaysia? sounds stupid i know but its hard to get GTR parts over here :D

My ANZ account is active still so it shouldnt be a prob to transfer the money for you.

JK

are the measurements 2x70mm for dumps and 80mm for the cat?

Sounds right. I know its 3" after the Y merge but dont know whats before that.

Do you willing to ship to Malaysia? sounds stupid i know but its hard to get GTR parts over here >_<

My ANZ account is active still so it shouldnt be a prob to transfer the money for you.

JK

Mate, as long as you pay for postage, I dont mind posting anywhere. But seriously I have no idea how much international postage will cost and how long it'll take for it to reach you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...