Jump to content
SAU Community

Recommended Posts

This is a expression of intrests sale.

Twin HKS 25/30s

Twin turbo manifolds unknown brand.

Mines sports division stainless dump pipes

Veil side twin Stainless front pipe to single collector cat

2 rb25 green lable airflow meters good for about 550 hp atws direct plug in.

HKS mushroom air cleaner kit with spare air cleaners and adaptors

All the piping from the hot side of the motor including the 2 pipes custom painted in 2 pac black metalic

This is a entire bolt on and go set up i made 470 hp atws on this combo on 20 psi with max 10 knock on a very safe tune.The turbos seem to be in great condition and in perfect working order,Can view on the car if need be and see it running and go for a drive if your prepared to come to hervey bay to buy them.

Reason for sale is im looking at doing something diffrent from the normal.

These turbos would have to be about the best street turbos ever made they are very responsive.Look up my build up threat to see dyno sheets and power curve.

$3500.00 ono i am open to offers but please do not be silly the dump pipes and front pipe them self to buy new are not cheap,Every thing here is in perfect working order.

Happy to have the items taken off at my expense happy to pack up and send at buyers expense.

I don t see the point in posting pictures as they are low mounts in the factor position

Please feel free to send me private tells i can produce dyno sheets to show hp.

Id prefer to sell as a kit and not part out but you can always ask,But place a offer don t just ask how much i will ignore silly offers and i know what this stuff is worth as i bought it all.

Thank you for your time.

personally been in the car and experienced the response all the way through the rev range, awsome price for an awsome setup good luck man!

cheers for the bump mate

All pms returned.This stuff is already discounted and is very cheap for what it is guys.

Flexible on price yes but not that flexible haha

Keep em comming guys open your purse strings you know this gear is decent and worth every cent.

when the engine was taken out for it to be resprayed the turbos were checked & hervey bay qld 3hrs north of brissy and I can help with freight if needed :)

Edited by johnbarry88

Turbos are tip top condition.

Im located in hervey bay queensland.

As for the kms i have done maybe 2000 to 3000 ks on them in 2 years i don t drive my car much to be honest due to work commitments.

Every thing on my car is in perfect working order if its not i replace it on the spot.

As i said befor reason for selling is i want to go to a single and have already purchased a new combo.

I don t care if they don t sell to be honest,Im not hard up for money but id like to see them put to good use some where else rather then sit in my parts collection thats getting rather 2 large to be honest.

would you ship to NZ?whats the best you can do for.

Twin HKS 25/30s

Twin turbo manifolds unknown brand.

Mines sports division stainless dump pipes

only want these.

cheers

How much for just veilside front pipes? Only if you're interested in separating of course.

Pm sent mate,Just waiting on a reply he made a offer on the turbos dumps manifold.

=] I am thinking of going back to street setup. I got a full TO4z Garret Turbo Kit making around 430kW at rear. Keem to swap and exchange $$$ Turbo is like brand new Absolutely to shaft play barely done 5000 KM mainly tune in and dont drive. Are you keen? =p

Edited by GTRBOYZ

I have had offers on about every thing but also had offers on the entire kit.

Im awaiting a few private msg.

Looks like id make far more money selling the kit in bits.

Every one asks how much for this and that.You would be better off making a offer to be honest.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...