Jump to content
SAU Community

Recommended Posts

Autech... expensive. I seem to recall less than 100 were made.

I do remember in an old HPI some guy took a 33 GTSt sedan and did a full GT-R conversion (yes I know, it takes all sorts).

Would you consider a 260RS Stagea wagon? Bit more realistic goal but admittedly I do not know the depths of your wallet...

T.

ppl who has them would tend to hold on to that due to its collector value. with the new compliance scheme in effect, and gt-r 4 door sedan will have to be complied as a separate model, I was told. One compliancer told me that due to the low volume and availability, he will only do it if the customer pays for all the process to gain full compliance approval (evidence pack) on the model, which is a lot more than $4000-6000 that most people pay for a compliance on an approved model already. I doubt it will involve destroying one good gt-r sedan for side impact crash as it is a variant of the 4-door model, but don't be surprise if you have to, then you'll need to buy two gt-r sedan. One to crush test (and reexport or destroyed afterwards), and the other to get the first compliance.

Cost wise? Nope. So best bet is to wait one of those believed to be 5 cars in Australia up for sale one day...

my pockets aren't deep enough for a stagea....I was just throwing aroung thoughts as 4 door aren't really looked at as cool here but I love em. Anyone who knows my old 4 door has to admit it was nice and I miss it but love my GTR so logically you can guess what I want. My GTR owes me a lot and does 12.3 but I'd swap anyday for a stock as a rock 4 door gtr

Guest darrinspencer

If you happen to find the White one that was featured in HPI, make sure you check it out throughly.

I am not one to normally bag other people's car, but I would not want you to buy something that is not so original.

I know the importer/panel beater that imported the car.

It was picked up really cheaperly at the time damaged.

The jap's did not want it.

It had hit a pole directly head on, and then the pole fell on the roof.

The car was repaired here with a new front and roof fitted approx 3 years ago.

The entire car was repainted.

I saw the car the day it came out of the shop. It looked pretty good.

The panel shop that did the work, does a really good job, so do not be totally put off by the previous damage, but least you know what to look for.

I know there is a couple.....anyone know of them. If so can I get contact details.

33

Make your own would be your best option i think.....Not a genuine GTR but a 4 door with GTR running gear, maybe start with a 4 door GTS4

Are you coming down for Drag Combat on Sat??

Ricknismo,

I have spent 12 months trying to find a 4 door GTR. There is only one real undamaged one (silver) that I know of and it was in Unique Auto's May '03 I think. It was sold for around $75k. There is the White rebuilt one and there is a black one I looked at last year . It is a GTs4 with vspec GTR running gear that was build by Skyline imports, it was sold for $40k october '03, the dealer was trying to tell me it was a real one (diddnt fool me, but I was very tempted) the car was sold to someone in dubbo. I have spoken to several importers and what RS73 said is correct as the car would need different compliance to a 4 door GTS or a 2D GTR as the evidence is not for a 4 door with a RB26.

I was told that the car would be about $65k + compliance, so drive away for $75k, but you would have an awsome car. I could not wait and go through the hassels, so I bought a XR6T instead.....I still want a 4 door gtr, but that will have to wait.

I can tell you where a Stagea RS260 is going for under $60k if you are interested....this is a 4 door wagon with the heart of a GTR vspec

Mal

give Derek a call from http://www.motorman.com.au/

The car should have compliance in a couple of weeks.

Pearl white, 40k/km 4.5/5 auction grade, its a beast. I would have got one, but I had to get a car that I could lease.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...