Jump to content
SAU Community

R32 Gtr Gearbox/engine Moved

Skizza_32GTR
 Share

Recommended Posts

Skizza_32GTR Rookie

Skizza_32GTR

Posted
Posted

Hey guys, Ive been getting some drive line noise recently so i thought i would check some things out and i was told to check my mounts out and i found the passanger side engine mount is rooted, the mount on the engine isnt even attached to the rubber on the cross member.. I jacked the side of the engine up and i could fit a finger between the gap... But the car drives alright i do get a thud on gearchanges and vibrations at low rpm's... I took a picture of the shifter fron in side the car..to me it looks way out? any 1 sen this before?

post-78232-1290686519_thumb.jpg

post-78232-1290686545_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/345544-r32-gtr-gearboxengine-moved/
Share on other sites
Daleo Grand Master

Daleo

Posted
Posted (edited)

I'd say you've answered your own question there. :)

Replace the Engine mounts, and check the gearbox mounts while you're there, if you've been driving around with a broken engine mount, you may have damaged the gearbox mounts also.

Maybe check out the Nismo mounts; a harder duro rubber, up for a bit more punishment. :rofl:

Edited by Daleo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Duncan
      Who has a Infiniti Q60, Q50 (V37)?

      By Duncan · Posted

      Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • MBS206
      Unpeeling the Orange

      By MBS206 · Posted

      What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
    • Dose Pipe Sutututu
      Battle of the broken skylines

      By Dose Pipe Sutututu · Posted

      And this guy, classic:  
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      FYI: Racebox RE7R Custom Tunes Released!   https://goracebox.com/.../2017-infiniti-q50-q60-re7r-tcm...   FOR GEN 2 (21+) VEHICLES, PLEASE SEE NOTE AT BOTTOM See more   But whomever tuned your car is the tuner you should go back to, AMS, Sonictune or BT Tune....
×
×
  • Create New...