Jump to content
SAU Community

Recommended Posts

Hi guys, I recently bought Nick's (racsov) C210 project and I'm in need of:

1 x bonnet (small dents acceptable, minimal rust please)

1 x rear bumper (minimal dents / no rust. No plastic end caps or mounts needed).

I'm located in south east Queensland so anywhere close-ish would be ideal, otherwise I'm willing to pay for postage for the bumper. The bonnet would be strictly pick up at this stage. I'm not sure how much these parts go for so please pm me with a price / pics if you have any of these items.

Thanks guys. :D

Edited by hao
Link to comment
https://www.sau.com.au/forums/topic/346062-wtb-c210-bonnet-and-rear-bar/
Share on other sites

You have almost no chance of finding the parts you want in the condition you described. Bonnets are invariably rusted under the front lip, and bumpers bend with the first light knock. I'd be snapping up any rubbish you can find and budgeting on rust repairs, repainting and rechroming to get them back up to scratch. Good luck.

I had a hunch finding parts in the conditions I described would be tough. Just thought I'd give it a shot anyway, you never know. :blink: Unfortunately I don't have room for a parts car, otherwise I'd have done this.

coupe72001, my bonnet is rusted (bad) in the exact spot you said. haha. I can repair this myself but if I can find a bonnet in better condition then the one I have now, it'd be much easier.

Thanks guys for the help.

Edited by hao
You have almost no chance of finding the parts you want in the condition you described. Bonnets are invariably rusted under the front lip, and bumpers bend with the first light knock. I'd be snapping up any rubbish you can find and budgeting on rust repairs, repainting and rechroming to get them back up to scratch. Good luck.

The cheapest to recond: a bumper down here is $300.00. They;ve all picked up on this now... anywhere you go now

it costs big bickies to recondition anything.. it does pay to put aside a whole car..if you have the room.. :down:

Are they NOT available new out of Japan? Has anyone asked their local Nissan dealer about the availability of a new bonnet??

Sure it might be expensive, but what price do you put on CAN'T GET in AUSTRALIA???

D

Are they NOT available new out of Japan? Has anyone asked their local Nissan dealer about the availability of a new bonnet??

Sure it might be expensive, but what price do you put on CAN'T GET in AUSTRALIA???

D

Fibre glass ones are the go in Japan these days, painting them are a""NO NO"" and they wobble at speeds

a bit like Rolf Harris wobble board.

I wouldn;t want it on my car... id rather pay up..."" Kidney prices""

Cheers.

Hi guys, I recently bought Nick's (racsov) C210 project and I'm in need of:

1 x bonnet (small dents acceptable, minimal rust please)

1 x rear bumper (minimal dents / no rust. No plastic end caps or mounts needed).

I'm located in south east Queensland so anywhere close-ish would be ideal, otherwise I'm willing to pay for postage for the bumper. The bonnet would be strictly pick up at this stage. I'm not sure how much these parts go for so please pm me with a price / pics if you have any of these items.

Thanks guys. happy.gif

I sent you a pic yesterday. The rear bar wasn't all that good, but without success, tried to get it off in any case. Where it was bent, it was hard up against the towbar and bolts not accessable. Sorry!

D

I sent you a pic yesterday. The rear bar wasn't all that good, but without success, tried to get it off in any case. Where it was bent, it was hard up against the towbar and bolts not accessable. Sorry!

D

Hi mate, I got the pic. Sorry about not replying, I was half way through something at work. Unfortunately I'm going to give it a pass, man. Thanks for your time though. :thanks: My current bumper is a bit better condition then the one in the pic, it's just a tad twisted and has a couple of small spots of rust. I guess I'll just spend a few extra doll hairs and get it straightened / rechromed.

I found some carbon fibre / fibreglass reproductions of C210 bonnets in Japan but they aren't cheap. oh well.

The FRP reproduction bonnet I found is 71,400 yen, no postage included. That's about $870 AUD + postage (which I guess would cost a fair bit being such a large item.) Then you've gotta add on commission for whoever you want to import it through.

The FRP reproduction bonnet I found is 71,400 yen, no postage included. That's about $870 AUD + postage (which I guess would cost a fair bit being such a large item.) Then you've gotta add on commission for whoever you want to import it through.

PLUS the customs duty because the value has to be under AU$1000.00 to get thru duty free, which includes cost + freight so you wont get out of it for under about AU$1200.00 minimum.

A bonnet is to big to come EMS, so duty will be involved due to it being part of the container load.

Your going to save about 15kg, maybe 20 tops?

Be easier & cheaper to go on a diet if you're worried about the weight factor.

D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...