Jump to content
SAU Community

Recommended Posts

Just a quick random question..

What do you guys recommend in relation to what battery size I should have in my r33 gtst? I also have a PFC command unit that runs everything if that is of any help..

Currently I have a dodgy battery that keeps charge but doesnt have enough power to quiet turn my car over and am thinking that the battery is currently too small??

Cheers

Link to comment
https://www.sau.com.au/forums/topic/346199-battery-size/
Share on other sites

NS40ZL is recommended.

Just because the battery holds charge doesn't necessarily mean it is healthy. The fact that it can't start the car would indicate that it is getting a bit past it's use-by date.

Link to comment
https://www.sau.com.au/forums/topic/346199-battery-size/#findComment-5575059
Share on other sites

comes down to how long it was sitting at the shop for before you bought it though.

if you drive your car and then turn it off and try to start it straight away will the car turn over? if yes, then your battery is losing charge when the car is turned off. this may be due to it beaing dead, it may be due to a current draw from something such as an alarm system. it may possibly be due to your starter motor being a bit sticky and not spinning as freely as it should, or even the alternator not quite charging like it should. my suggestion would be to check the current draw on the battery when the car is off, unless of course you answered no to the question above and it won't turn over even immediately after the car has been running for a while.

Link to comment
https://www.sau.com.au/forums/topic/346199-battery-size/#findComment-5575759
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...