Jump to content
SAU Community

Recommended Posts

Up for sale is my S13 which i have put every ounce of patience, time and care into this thing. Some of you will remember it from back in the day as the white silvia with the gate poking its nose out the bonnet. I've reached that time where i need something new and im a little bit over it sitting around doing nothing. The car is ready to be drifted, targa'd or whatever else floats your boat.

Quik notes: The car currently has no tune but before sold will do.

The car is currently un registered but if you're keen enough it can be. ( yellow sticker expired )

It will possibly feature in a magazine before sold to new owner.

Mods are as follows,

Body:

-Full respray in arctic white with gloss black bonnet

-Full genuine plastic nismo kit including rear pods

-Boot lock shaven

-Antenna shaven

-Uras tinted tail lights

-Izumida style front end with sealed beamed lights ( new )

-Tow hook protruding through front bar ( new )

Interior:

-Fully stripped out

-Drivers bride zetta 2 fixed back seat ( new condition )

-32 GTR passengers ( good condition )

-Takata racing harness ( new )

-Fire extinguisher

-Full bolt in role cage

-Battery located in boot

-Fuel setup in boot ( new )

-All factory wiring wiring has been removed and a custom body harness has been made throughout the car

-Factory heater box and controls removed from under dash

-Dash has real carbon fibre inserts where air vents, stereo and cluster are from factory ( new )

-All wiring is hidden under dash

-Microtech digital dash display ( new )

-Genuine autometer fuel and oil pressure guages ( new )

-Nitrous tank mounted on gearbox tunnel

-K-Sport hydraulic handbrake ( new )

-Genuine OMP dished suede steering wheel

-Full toggle switch dash setup ( lights, fuel, ignition, nitrous and kill switch ) ( new )

-DMAX fibreglass door skins

-Front windows removed along with actuators

Driveline:

-Standard 5 cogger

-Exedy 5 puk clutch with 2800 pound pressure plate ( new )

-Genuine B&M short shifter

-Locked diff

-New oils in box and diff

-Nismo braided clutch line ( near new )

Brakes:

-R32 Gtst front calipers

-R32 GTR rear calipers

-Project Mu braided front lines ( new )

-Braided rear lines ( gtr items )

-5 Stud conversion all round

-K-Sport hydraulic hand brake ( new )

-Upgraded brake master cylinder and brake booster (R32)

Suspension:

-HSD HR coilovers ( near new )

-Cusco strut braces front and rear

-PZP adjustable castor rods ( near new )

-PZP adjustable rear toe arms ( new )

-PZP adjustable rear camber arms ( new )

Wheels:

-Drift tek 17/9.5 -12 ( with tyres )

or

-R33 GTR ( with tyres )

Fuel system:

-Intank 040 ( near new )

-External 044 ( new )

-Surge tank ( new )

-Ethanol proof lines ( new )

Engine managment:

-Microtech LT10S ( new )

-Microtech X4 ignitor ( new )

-Microtech Digital dash display ( new )

-Custom hidden wiring harness for engine

Engine:

-SR20DET ( red top, approx 65 000kms on motor )

-Trust TD06 20G

-Trust 47mm external gate ( screamer protrudes through bonnet )

-6Boost highmount manifold ( near new )

-Braided oil feed

-Custom 3 inch turbo back exhaust with dart zumi twin pipes

-PZP Greddy style intake plenum

-Tomei 256 degree cams ( near new )

-Tomei rocker arm stoppers

-Sard 850cc injectors ( new )

-PZP front mount cooler with custom stainless pipe work ( including turbo intake pipe )

-K&N air filter ( new )

-NOS 100 shot wet nitrous system ( new )

-PZP ally radiator ( new )

-Tomei vented coilpack cover

-Gizzmo EBC ( new )

Engine bay extras:

-Custom oil catch can ( Stainless )

-Custom coolant over flow catch can ( stainless )

-EBC solenoid hidden

-Power steering resevoir re-located

General extras:

-Solid mounts on both engine and gearbox ( new )

-Fresh engine oil

-Fresh driveline oils

-Fresh coolant

-Fresh power steering fluid

As you can see alot of these parts are new and havn't seen the road yet, the near new parts would have only seen the road for less than 5000 kms before the car was stickered. Its ideal for someone wanting to get into racing and also wanting to avoid a big build bill. Going by the list of mods its a huge loss but someone elses gain.

As stated the car needs a tune and will be sold as a running track car, pictures are to come during the week but for now i'll post this up to see what interest comes.

Asking price:

$15 000 FIRM ( Will consider trades/cash adjustment for the right car, along the lines of jap 4 door preferably of the Cefiro type :( )

Contact: 0431 197 087

img-resized.png Reduced: 95% of original size [ 1024 x 768 ] - Click to view full imagexeh7cw.jpg

Link to comment
https://www.sau.com.au/forums/topic/346340-arctic-white-silvia-track-ready/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...