Jump to content
SAU Community

Recommended Posts

Hi guys,

I recently had the timing elt on my R33 GTS-T done and a week after the serice my car won't start. The best description I can give is that it turns over but still won't start. When the key is in the ignition the check engine light is on now as well.

Any help anyone can give me would be greatly appreciated

Cheers

Link to comment
https://www.sau.com.au/forums/topic/346632-car-wont-start/
Share on other sites

No I don't. If the battery is flat won't all the electrics stop working, ie lights and stereo?

Not necessarily.

Some lights etc. may dim, but it's not until the battery is completely dead that the car accessories won't power on.

Try turning off everything (radio, fans, aircon) and try turn it on.

Try do a push start (put car in second gear, hold down clutch, take off handbrake and get your mate to roll the car for you. Dump the clutch and it should crank on. Make sure your key is in the "on" position.

Were your headlights dimming when you were turning on your car?

Was anything dimming when you turned on your car?

Did you car go er-er-er-er-er-er-er vroom when starting up?

Link to comment
https://www.sau.com.au/forums/topic/346632-car-wont-start/#findComment-5580287
Share on other sites

Not necessarily.

Some lights etc. may dim, but it's not until the battery is completely dead that the car accessories won't power on.

Try turning off everything (radio, fans, aircon) and try turn it on.

Try do a push start (put car in second gear, hold down clutch, take off handbrake and get your mate to roll the car for you. Dump the clutch and it should crank on. Make sure your key is in the "on" position.

Were your headlights dimming when you were turning on your car?

Was anything dimming when you turned on your car?

Did you car go er-er-er-er-er-er-er vroom when starting up?

As far as I remember the lights were fine, Went to the supermarket, came back to the car, it started then the revs kept going down untill it turned itself off. Now the engine cranks over but yea just seems its not getting the final kick to start it up.

Someone has suggested the mechanic may have cracked the crank shaft sensor? Is this a viable option?

Thanks for your suggestions people

Link to comment
https://www.sau.com.au/forums/topic/346632-car-wont-start/#findComment-5580338
Share on other sites

take your battery out.. Go to a battery shop and they will test it for you.. It is the simplest and cheapest option as they would do this for free.. if your battery is fine.. report back here if this was your solution or if it's fine and go from there..

Edited by .:: GimpS-R34 ::.
Link to comment
https://www.sau.com.au/forums/topic/346632-car-wont-start/#findComment-5580343
Share on other sites

Went to the supermarket, came back to the car, it started then the revs kept going down untill it turned itself off.

The trouble is, that you went to the supermarket instead of Supercheap Auto. :whistling:

Your car knew this. But you didn't.

Your car's pacemaker carked it > and now you have to resuscitate it with +ve to +ve/-ve to -ve

Intensive care is now required with a new battery.

Link to comment
https://www.sau.com.au/forums/topic/346632-car-wont-start/#findComment-5580479
Share on other sites

how fast is it turning over? if it is turning over pretty much as fast as normal (or even just a touch slower) then your battery is fine and you have an electrical issue somewhere, such as the CAS.

Its turning at the usual rate which is why I'm thinking something electrical. I will try the CAS tonight

cheers

Link to comment
https://www.sau.com.au/forums/topic/346632-car-wont-start/#findComment-5580626
Share on other sites

ok well if it's turning over as fast as normal then ignore all the posts above about being a dead battery (i dare say the missed the bit in your first post where you said the car is turning over and just not firing).

sounds like the CAS simply isn't registering that the engine is turning over, so not firing the ignition or the injectors. i think from memory you can test this theory by turning the key to the on position and removing the CAS from the motor (leaving it plugged in)and then spinning it by hand. you should hear the injectors click as they fire. not sure if you have to disconnect the ignition loom before doing this to stop the spark plugs firing. i can't remember.

Link to comment
https://www.sau.com.au/forums/topic/346632-car-wont-start/#findComment-5580794
Share on other sites

ok well if it's turning over as fast as normal then ignore all the posts above about being a dead battery (i dare say the missed the bit in your first post where you said the car is turning over and just not firing).

sounds like the CAS simply isn't registering that the engine is turning over, so not firing the ignition or the injectors. i think from memory you can test this theory by turning the key to the on position and removing the CAS from the motor (leaving it plugged in)and then spinning it by hand. you should hear the injectors click as they fire. not sure if you have to disconnect the ignition loom before doing this to stop the spark plugs firing. i can't remember.

Thanks mate this has been really helpfull

Just need to finish work then go home and try

Link to comment
https://www.sau.com.au/forums/topic/346632-car-wont-start/#findComment-5580854
Share on other sites

  • 2 weeks later...

Just wanted to say thanks to everyone for there help and let u kno where I'm at

Got a new CAS but that didn't fix it so I got a mate around who actually knows something about cars (coz I don't) and we checked the fuel line and it seems theres no fuel being pumped through

so we changed the filter an checked the relay but still no good so I'm looking at getting the fuel pump changed

had a crack at it but it looks like a complete pain in the arse so I'm going to try and tow it to a mechanic and get them to change it :P

Thank again for eveones input

Link to comment
https://www.sau.com.au/forums/topic/346632-car-wont-start/#findComment-5592078
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...