Jump to content
SAU Community

Recommended Posts

as topic says, looking for a place to buy my rb26dett front cut from, more than likely going to go with Just Jap at this stage, seam to be a really good deal and is only about 5 hours from where i live.

i know forum rules are that you cant badmouth or activelly promote your own buisness but there is nothing againts sending me a PM if you have had a horror story from an import yard, or if you have had a great experiance and would recommend again.

Also anything that i should particularly be aware of? i allready have a full timing kit, water pump and N1 oil pump ordered, and im purchasing motor without turbo as im going to run a single.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/346689-best-place-to-buy-frontcuts-from/
Share on other sites

who ever you buy it from dont tell them if you are putting bigger turbo's or aftermarket anything on it or your warranty will be void.

just tell them you need it as a stock replacement for your GTR.

as topic says, looking for a place to buy my rb26dett front cut from, more than likely going to go with Just Jap at this stage, seam to be a really good deal and is only about 5 hours from where i live.

i know forum rules are that you cant badmouth or activelly promote your own buisness but there is nothing againts sending me a PM if you have had a horror story from an import yard, or if you have had a great experiance and would recommend again.

Also anything that i should particularly be aware of? i allready have a full timing kit, water pump and N1 oil pump ordered, and im purchasing motor without turbo as im going to run a single.

Cheers

5 hrs away where do you live, try sss at girraween they usally have 26s instock and if you have problem with engine they will swap it, most of there engines they drive in japan for them selfs to see if there stuffed, remember cheaper isn,t always cheaper

as topic says, looking for a place to buy my rb26dett front cut from, more than likely going to go with Just Jap at this stage, seam to be a really good deal and is only about 5 hours from where i live.

i know forum rules are that you cant badmouth or activelly promote your own buisness but there is nothing againts sending me a PM if you have had a horror story from an import yard, or if you have had a great experiance and would recommend again.

Also anything that i should particularly be aware of? i allready have a full timing kit, water pump and N1 oil pump ordered, and im purchasing motor without turbo as im going to run a single.

Cheers

im asuming your in wa. i used kyp in welshpool they were great they did a compression test for me and also started it up for me. speak to ben if you go there he doesnt do it for the money he does it for the love of cars

i know forum rules are that you cant badmouth or activelly promote your own buisness but there is nothing againts sending me a PM if you have had a horror story from an import yard, or if you have had a great experiance and would recommend again.

i don't think too many people are going to get on here and bad mouth there own business...haha

i've gotten a few motors off SSS and always found them to be pretty good, but as you say they have no good 26's... i've bought a bit of gear of just jap and always found them to be pretty good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...