Jump to content
SAU Community

Recommended Posts

Nitrous.

Or, free flowing exhaust.

Or, Nistune.

1K isn't really going to make a massive difference in power, besides the nitrous...

Also, not too sure what you mean by getting around 80% power or who has been saying that...

Link to comment
https://www.sau.com.au/forums/topic/347131-full-power/#findComment-5586603
Share on other sites

can someone tell me what is the cheaper way to get more power for S2 auto. my budget is around 1k

also ppl said a standard s2 only get around 80% power not the full power, is that right?

1. 80mm turbo back exhaust and high flow panel filter = $1k gone

2. Save up for a Nistune chip and tune.

Link to comment
https://www.sau.com.au/forums/topic/347131-full-power/#findComment-5587126
Share on other sites

can someone tell me what is the cheaper way to get more power for S2 auto. my budget is around 1k

also ppl said a standard s2 only get around 80% power not the full power, is that right?

But srsly, buy a nismo, hks silent or super dragger second hand off auction. A quality second hand dump pipe, possible front pipe and high flow cat will be needed, thats where the initial cost is mainly but hp to be gained. Then buy nistune. The base tune is ok but will need tuning to go further. Not much coin really to play with at 1k.

Edited by dirtyRS4
Link to comment
https://www.sau.com.au/forums/topic/347131-full-power/#findComment-5587289
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...