Jump to content
SAU Community

Recommended Posts

hey guys up until a few months ago i owned an n14 SSS pulsar, it had coilovers, sway and strut bars, an SR20de making about 110kw @ the wheels and a stripped interior as my daily. My girlfriend got sick of us having to take her car every time we went out and told me to buy something safer and more practical to put our son it. so i went and picked up an r33 Gts-t. Apparently to her this is not a practical car with a kid, I sat her down and explained to her as nice as I could "too bad car stays" lol. Over the past months i have been spending a bit of time and cash on the 33 so i thought i would make a build thread so I could keep track of what is going on with the car.

this is how it looked the day i picked it up

post-65509-0-27837700-1292571928_thumb.jpg

on the way home I stopped at a mates place that some how picked up the sound of an exhaust leek, I could not hear it at all lol. We had a look around and discovered a few broken exhaust studs. Next day go straight into it and ripped everything off to start replacing the studs (and broke a few more)

post-65509-0-58544400-1292572246_thumb.jpg

and putting it all back together.

post-65509-0-31490600-1292572373_thumb.jpg

Next thing on the list was a service. Not owning a car like this before I wasn`t too sure what to get hope I got what i should of lol. Hpr15 oil, Greddy oil filter, NGK copper plugs ( i don`t like irridiums), Nulon Long Life coolant along with engine and coolant flush.

After all of this i was feeling kinda happy with the car and cruised around for a bit only to get Defected on my way home one night. Not to worry some dodgy moves and it passed. It was at this point i thought the Hektick Dose was crap and opted to run the stock BOV and went about trying to make it a little more un-noticeable and painted the cooler black.

post-65509-0-81114600-1292573241_thumb.jpg

next pay day i went a bit crazy lol brought a HKS pod (im fabbing up a box for it at the moment), Cusco rear strut bar, Juran front strut bar, Greedy breather tank, Turbosmart boost controller, Suede wheel, a fuel pressure reg and a walbro pump.

Pic of Front strut bar and breather tank

post-65509-0-79293500-1292573633_thumb.jpg

Rear strut bar

post-65509-0-13900500-1292573698_thumb.jpg

Steering wheel, shift light and boost gauge

post-65509-0-22142900-1292573809_thumb.jpg

That`s about it for now :D I hope on getting out in the garage and getting some work done tomorrow, if I do ill update with what I have done.

Link to comment
https://www.sau.com.au/forums/topic/347847-r33-daily-build/
Share on other sites

  • 5 weeks later...

I haven`t put anything up here for a while but not much has really changed my interior plastics from my gear stick surround to my dash surround have started to go all crap and the paint on them is pealing and really lets the inside down. I tried to sand it down and paint it black but you could tell it wasn`t original so I have scraped that idea and started to look for immaculate ones for sale witch I have not been able to find so at the moment I`m not to sure on what to do, weather I keep on looking or carbon wrap the old ones I have Im just worried with the carbon wrap the inside might start to look like an autosalon car. I also finally put the HKS pod on but have not made a box yet im not to sure what material to use and how i should actual design it. Last week was the worst week and most expensive week that i have had with this car so far I went to get some new tyres Monday 245/45 R17 for the rear and 235/45 R17 on the front. The next day I went for a drive and destroyed my clutch it would not dis engage so I towed it to my mates house Wednesday morning we pulled the box out and the clutch plate was fused to the pressure plate and the fly wheel was marked relay bad. I went and got a PBR/RPM 5 puck brass button clutch and also got the fly wheel machined as well. Tuesday arvo we started to put it all back in and spent 4 hours trying to get the box back in but it would not go we put it down to the shit plastic clutch alignment tool and gave up for the day, the next day my mate went into work and made me a new tool exactly the same as the input shaft we used that and bingo box slid in. On thursday I went down to flemington to pick up some parts as I got there my clutch pedal fell to the ground. We towed it back to my mates house and found out the little pivot ball that the clutch fork pivots on broke so box out again put a new one in and its sill good and all fixed i think!

Car up and box being pulled out

post-65509-0-09981700-1295179416_thumb.jpg

New clutch that we put in

post-65509-0-23807000-1295179504_thumb.jpg

While the clutch was getting put in i put that tar shit on my top pipe after reading about it in the DIY section on this forum. encase anyone is interested we used a Jaycar temp sensor and display we put the sensor in the pipe and it showed 8.5 deg hotter with the tar on the pipe!

post-65509-0-54210300-1295179713_thumb.jpg

And just random pic of the car clean before new tyres went on

post-65509-0-39245900-1295179762_thumb.jpg

Ill try to keep updating as i go

Link to comment
https://www.sau.com.au/forums/topic/347847-r33-daily-build/#findComment-5627694
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...