Jump to content
SAU Community

Intercooler Kit

Komet

By Komet,
in Engines & Forced Induction

 Share

Recommended Posts

Komet Contributor

Komet

Posted
Posted

Hi guys,

I have just recently had a new intercooler kit installed, and I thought I would like to share the design with you guys.

It's all CNC mandrel bent one piece aluminium tubes, and I don't think there's anyone else who has this design in Australia.

From the pics you can clearly see that it does not require alot of piping, and there is no need to cut the radiator fan.

All the tubes are replaced, including both the factory compressor inlet and outlet.

The cooler is a light weight tube/fin core, and the end tanks are made from light weight, pressed sheet aluminium.

What do you guys think of the kit??

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/
Share on other sites
Komet Contributor

Komet

Posted
  • Author
Posted

xRHETTx - all up it cost me close to $1,700

The business is performance manufacturing and they're located in Wetherill Park NSW.

I don't think they have a R32 kit at the moment, but they can do it in a reasonable quick time.

You can give them a call on 9756 0495 and ask for Mark

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-697776
Share on other sites
FORCE Explorer

FORCE

Posted
Posted
Hi guys,

I have just recently had a new intercooler kit installed, and I thought I would like to share the design with you guys.

It's all CNC mandrel bent one piece aluminium tubes, and I don't think there's anyone else who has this design in Australia.  

From the pics you can clearly see that it does not require alot of piping, and there is no need to cut the radiator fan.  

All the tubes are replaced, including both the factory compressor inlet and outlet.

The cooler is a light weight tube/fin core, and the end tanks are made from light weight, pressed sheet aluminium.

What do you guys think of the kit??

Hi Nick. Glad you are happy with it :D

Here is a pic of the "Titanium Look" anodized pipes I spoke to you about.

PICT0030.JPG

David's pipes are ready to pick up from the anodizers so we will get them tomorrow. He decided to go with purple. We are also picking up the pipes for the EVO, which are red. I can't wait to see how some different colours look on the cars. I am thinking of making up a GTS-T kit in the same colour as shown above.

We could swap yous for the anodized ones you know....... :D

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-698224
Share on other sites
TTT Grand Master

TTT

Posted
Posted

Guys..

Do a search for the Gibson Motor sport R31 race car.

that is very similar design from the throttle body to the cooler.

Actually, the Gibson motor sport bend was even tighther than that and they made some ridiculous power from the RB20 back then..

BOOSTMEISTER from these forums had a similar set up.

I believe that SydneyKID uses this type of setup on the RB20/RB25 motor intercooler pipes..

If I ever get another skyline, that is how I will go about it..

It probably saves about 1 meter of pipe work (maybe a little less) AND, your pipes no longer go over the radiator fan and turbo before it goes in to your engine.

BTW, the Titanium look is brilliant.. best looking pipes I have seen.

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-698279
Share on other sites
FORCE Explorer

FORCE

Posted
Posted
Anyone else have a problem with the U bend out of the cooler to the plenum? looks a bit tight to me.

More then 90 degree bends on cooler piping is bad from what ive learnt

What you are saying is partially correct, but all kits are a compromise of many factors. Unless you are going to change the plenum, our kit has less bends than any other kit on the market (as far as we are aware). The bend you are talking about is exactly 160.5 degrees, and eliminates the two 90 degree bends found on most kits. We also change the pipe from the turbo to the inner guard, further reducing the number of bends.

Any way, to cut it short, I agree with what you are saying but I think we have done the best we could to minimise the number of bends, and the lenght of the pipes.

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-698304
Share on other sites
FORCE Explorer

FORCE

Posted
Posted
Guys..

Do a search for the Gibson Motor sport R31 race car.

that is very similar design from the throttle body to the cooler.

Actually, the Gibson motor sport bend was even tighther than that and they made some ridiculous power from the RB20 back then..

BOOSTMEISTER from these forums had a similar set up.

I believe that SydneyKID uses this type of setup on the RB20/RB25 motor intercooler pipes..

If I ever get another skyline, that is how I will go about it..

It probably saves about 1 meter of pipe work (maybe a little less) AND, your pipes no longer go over the radiator fan and turbo before it goes in to your engine.

BTW, the Titanium look is brilliant.. best looking pipes I have seen.

Yeah, what he said! :D

Thanks for the compliment on the pipes.

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-698312
Share on other sites
TTT Grand Master

TTT

Posted
Posted

red17.

once it gets under the car, you will require MORE pipes and tighter bends to get to the other side of the cooler on the drivers side.

There are kits that have one outlet on the drivers side of the intercooler come out on the bottom on a sharp angle and have a pipe running along the bottom of the cooler but I'm not sure if it has good flow characteristics at that EXIT point on the drivers side.

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-699550
Share on other sites
RB20LagWagon Proficient

RB20LagWagon

Posted
Posted

The thing we are trying on our intercooling here in the west is to go to the far side(drivers side) of the intercooler first then come through the cooler and exit on the passenger side and it goes over the stock path from there on. thus after the cooler all bends are minimal and soft

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-699585
Share on other sites
red17 Experienced

red17

Posted
Posted

RB20LagWagon,

Thats effectively what my cooler (currently being stored in my wardrobe) does. My drivers (inlet) side tank has been modified so that I can run a pipe behind the core back to the stock piping on the passenger side. This requires minimal bends, next to no custom work because its basically a straight bit of pipe with one bend on the end.

GTST. you dont use that end of the core as the EXIT point, you use it as the ENTRY point so that the air has the shortest distance and least amount of time to be heated up on its way into the engine. If you had the end tank modified properly the effect can be minimised. ALOT of japanese kits do this for the RB20/25 motors, so it cant be that bad.

Red17

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-700188
Share on other sites
FORCE Explorer

FORCE

Posted
Posted
RB20LagWagon,

Thats effectively what my cooler (currently being stored in my wardrobe) does. My drivers (inlet) side tank has been modified so that I can run a pipe behind the core back to the stock piping on the passenger side. This requires minimal bends, next to no custom work because its basically a straight bit of pipe with one bend on the end.

GTST. you dont use that end of the core as the EXIT point, you use it as the ENTRY point so that the air has the shortest distance and least amount of time to be heated up on its way into the engine. If you had the end tank modified properly the effect can be minimised. ALOT of japanese kits do this for the RB20/25 motors, so it cant be that bad.

Red17

That is the easiest way to do a kit for the GTS-T, but although the kit only needs a minimal amount of piping, the total length of piping once installed is huge!

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-701491
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...