Jump to content
SAU Community

Recommended Posts

Hey guys just got a problem with my R33 the auto box it doesn't shift into 4th gear just keeps in third e.g high way driving to get to 100km/h it revs to 4.5k is there some plug that may have come loose or something in the engine bay or the any help would be great

Cheers

CHi

Link to comment
https://www.sau.com.au/forums/topic/348892-automatic-r33-box-problems/
Share on other sites

there are a set of 4 looms at the front of the engine bay, under the battery. disconnect all 4, clean them with contact cleaner and try close up the wire clamp things inside the looms so they close tighter when you plug them back in. you'll know what im taking about when you see them.

that should fix your problem.

ok security the battery is in the boot for the R33 mmmmm and also when over drive is engaged nothing happens even when it is disengaged? like it doesn't shift to third or fourth it stays in second ? so is there any plugs etc i have to check?

Cheers

Chi

Hey security i've already sprayed contact cleaner and made sure the connections are tighter at those four plugs/loom but still nothing :/ but however i found two plugs at the front near the head lights/radiator which wasn't conencted to anything so any ideas heres a picture of the plugs

post-27271-0-38298300-1294391756_thumb.jpg

cheers

chi

yeah that will happen.

if the oil is low it will create heat as well as drop the oil pressure inside the box. the auto's gear changes relies on the oil pressure.

change your oil and see where that gets you. you may as well drop the sump off and clean the filter as well.

  • 8 years later...

bringing up a pretty old thread here but was curious if this issue ended up getting resolved?

may not be able to get an answer, just noticed half of the members that responded and created the post having been on here for quite a few years.

Edited by bazr33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...