Jump to content
SAU Community

Recommended Posts

Hi, Got a 2002 V spec II NUR in Mellinium Jade, 39xxxkm with LMGT 4 18x9.5+12 power FC with controller,sliding cam gears,N1 turbos,s/s front pipe, Ganador titenium exhaust,exerdy cusion button clutch ( to handle 306kwaw power) Nismo suspensions with oil reservior ,HKS EVC6 controler,720cc injectors etc.etc at $89800 ono.

Alex 0433878905

Campbellfield Melbourne

  • 2 weeks later...

hard to find a V-spec 2 for 55K~~

You can get a V-Spec 2 for 55K if you import and have the patience

Not sure about BB color V-Sepc 2

Got a Black V-Spec 2000 model with Nice mods for around 45K landed only last month,but you need to be pretty patient

Might be worth keeping an eye on the import shops as they usually list the cars that they have currently in transit. If one looks ok they will let you put a fully refundable holding deposit on it pending an inspection by yourself and a mechanic. Best part is if you like it then its yours but if you don't then just say its not good enough and you get your deposit back. Just make sure you get it worded that way when you put the deposit down.

Good luck with your search and like they said above just be patient.

I'm in Melbourne and considering selling my R34 Vspec, as I can' t use it as much as I want to, I ride my motorbike to the city every day and hardly use it on weekends. 60k is what would make me sell immediately.some quick info, to give you an idea.- yr 1999- Odo under 100k, timing belt is aftermarket upgraded anyways- bayside blue , full factory body kit- mildly tuned to 281kw @ all wheels, has heaps more potential- Brand new tyres and alignment just done- Like new inside out, you will hardly find a scratch- all seats retrimmed with new non slip leather- serviced every 5k- power fc, boost controller, intercooler, exhaust plus heaps more, looks immaculate top to bottom- too much to list, if you're interested , just pm me and you can have a look at the car in person.forgot to say something about the audio system, not a bad setup with amp+woofer & AVIC phone/nav/rev cam etc

post-52276-0-49239500-1296451453_thumb.jpg

post-52276-0-31797400-1296451578_thumb.jpg

post-52276-0-01413000-1296451549_thumb.jpg

post-52276-0-29373000-1296451831_thumb.jpg

Edited by M'ck'y

Thank you guys for the reply.

M'cky : nice looking car you have there!but im looking for v-spec 2 as the year is around 2001- 2001 =(

farch : good idea,but v-spec2 comes with different spec =(

thatlbeme : any recommendation on which import shop should i look at?p.s : i am located in adelaide,would be great if they have any..any suggestion?maybe outside adelaide perhaps? =)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...