Jump to content
SAU Community

Recommended Posts

Hey everyone!

Soo last time I got around to putting a post up, i had sweet f a access to teh nets and well 3 mobile was being ....... well was just being super gay so to whoever I didnt get back to, you now know why.

Anyways heres the DL

I have one damaged A31 and one A31 Shell

Note the damaged cefiro has been hit quite hard at the front so no forward panels are of any use besides maybe being used as a UNIQUE paper weight lol

What I do have available from the damaged cef is as follows -

Interior wise I have just about everything, what isnt cracked/damaged inside will be forsale.

Exterior wise I have all doors w/ glass and electric window motors etc all working. Glass in clean (NO TINT) and panels are straight.

Boot lid

Factory front and Rear bumpers, both need paint, front is in OK condish, rear is perfect.

Rear window glass w/ wiper.

Now as for the cef shell -

Weld in halfcage

Boot

Bonnet with bpin holes

front drivers , front passenger and right rear passenger door w/ glass

Rear glass , wiperless

Now some other spare I have are as follows -

Cefiro dashmat in good cond

S1 Projector lights w/ black backing and side repeators

twin hole grille x 2

1x complete set of coilovers w/ adjustable tops

Sooo thats off of the top of my head, I will more than likely have other parts available.

Please TXT to my mobile or last resort send me a PM and will get back to you asap, which is more than likely in the evening.

All parts are located in Perth WA and can organise frieght at buyers expense.

Thanks so much,

Tales

0430-124-417

Link to comment
https://www.sau.com.au/forums/topic/349462-fs-cefiro-partsaurus/
Share on other sites

Im working on it although its difficult to put a price tag on items that you dont know that value of =/

Anyone feel free to pm me with some information, it would be greatly appreciated =)

Complete doors and glass still fs.

Grey interior in great condish.

Bonnet with bonnet pins, great condish in primer ready for paint.

Bootlid.

Front projector lights with black backing still fs.

Random bits of trim, power window switches etc still here

RB20DET cylinder head good cond.

Rb20DET coilpacks, good working condish 60.00

GT2871R kit, with 20 manifold gaskets, no lines 1000.00

2 x s1 grille, ok condish

Have front and rear glass wiperless. Give me a good offer and will have proffessionaly removed and shipped to you.

Have a pair of 25mm over fenders that require holes to be drilled and vents to be cut out. fiberglass job. 100.00 slight crack in one.

  • 2 months later...

gday there tales , how are ya buddy , hope all is well , i tried to contact you before regarding some of the above parts i need

i was wandering on your cefiro rolling bare shell , is the passenger side rear quarter in good condition as well as the front windscreen on the same shell in tact and no cracks watsoever ?

if you can do me a deal on that shell , i am more then happy to organise some freight to pick it up from where you are to get it shipped back here to sydney

hope you can help me out and sort this out so it gets out of your way

cheers anthony

btw 1 more thing and if you can quote me on the stock rear bar for the cefiro man

thanks again for your time

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...