Jump to content
SAU Community

Recommended Posts

i have heard of people finding their steering to be heavier after fiting the lockbar but then there is no movement in the rear wheels anymore

when i fitted the lockbar i went down and got a four wheel allignment and afterwards found the car to be more predictable when cornering under power (in a controlled enviroment of course) and noticed no difference to the feel of the power steering

the only thing that changed was the hicas light stayed on easily fixed by removing the globe

have a look in the diy section of the forums im sure all this will have been covered along with a guide on how to fit the lockbar

Link to comment
https://www.sau.com.au/forums/topic/349609-hicas/#findComment-5616168
Share on other sites

On the 32's, the HICAS was a hydraulic system running off the same power steering pump, etc as the front steering.

On the 33's, it's a fully electric system, completely separate from the front power steering, so unless someone stuffs something up terribly, your standard power steering won't be affected.

Link to comment
https://www.sau.com.au/forums/topic/349609-hicas/#findComment-5617663
Share on other sites

33s have speed variable power steering , softer at low km , harder at high km

depending on how hicas is cancelled you will lose the variable part and only have the harder setting

R32's have the speed sensitive steering too.

Heavy steering is usually a HICAS fault, common causes are removal of the HICAS control unit and incorrect alignment of the clock spring behind the steering wheel (steering angle sensor).

P.S. ditch HICAS, the car will be more predictable and safer on the edge.

Link to comment
https://www.sau.com.au/forums/topic/349609-hicas/#findComment-5624686
Share on other sites

my hicas seems to be a little bit weird... does it's check sometimes when im just cruising down the road (happened both times around doing 60km/h)

which in turn makes the butt end of my gtr shake and is quite a dodgy feeling when your car does that... is it easy to still remove hicas on 33gtr's? same business or a little different?

Link to comment
https://www.sau.com.au/forums/topic/349609-hicas/#findComment-5629761
Share on other sites

super hicas, hicas, its all the same shiz, there are few ways of doing it tho, some ppl are happy jsut to put in a lock bar, some ppl remove the whole system lines, fuse/relay etc

u can buy shitty chinese ones, or for about $50-$80 more u can buy urself a good one.

talk to Jeremy at styled 2 race he got me in my whiteline one

Link to comment
https://www.sau.com.au/forums/topic/349609-hicas/#findComment-5630570
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah nice idea, you mean to suction it to the gauges? I hadn't thought of that.
    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
×
×
  • Create New...