Jump to content
SAU Community

R33 Floor Mats: $60 Ono Mint Condition

macdoodle69
 Share

Recommended Posts

macdoodle69 Experienced

macdoodle69

Posted
Posted

R33 floor mats: $60 ono and in mint condition

will email pics out... mint condition floor mats as per the ones that come factory in what i am led to believe the majority of r33's

located: Adelaide Hills

0401994240

[email protected]

  • Nope 1
macdoodle69 Experienced

macdoodle69

Posted
  • Author
Posted

bump..... hopefully no haters start trouble on my posts like in previous posts and thread where i have made perfectly legit sensible comments..... even though the justification of such points can be an entertaining process!

brendo.r32 Enthusiast

brendo.r32

Posted
Posted (edited)

When do the floormats hit boost? What power are the mats making at the floor? How much weight could they safely take ie. 1 x 200kg douchebag?

Cheers

Brendo

Edited by brendo.r32
brendo.r32 Enthusiast

brendo.r32

Posted
Posted

what carpet fibre was used in construction? I need loop size, thickness etc. Also what sewing machine was used? Did it have overlocker etc.

Cheers

blk94r33 Mentor

blk94r33

Posted
Posted

When do the floormats hit boost? What power are the mats making at the floor? How much weight could they safely take ie. 1 x 200kg douchebag?

Cheers

Brendo

Lol

Can the car safely run 15 PSI through the floor mats? What's 15 PSI in BAR?

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...