Jump to content
SAU Community

Recommended Posts

for sale

Tomei fuel pressure reg

2 mounths old

works 100%, never had a problem

Price $200 ono

located in melbourne, postage can be arranged

contact jayden on 0405 422 600 for more info

post-77468-0-49022400-1294819444_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/350090-tomei-fuel-pressure-reg/
Share on other sites

where was this purchased from?

do you have a reciept?

just want to make sure its 100% genuine

hey mate yea no probs

it was purchased from chassers motorworks in west melbourne

yea i still got the receipt

what sort of power will this support?

up to 380hp

i had 250rwkw in a gtst and its was fine

i was aiming for 300rwkw and this was what chassers provided me with

what sort of power will this support?

Some people have absolutely no idea do they ???

A fuel pressure regulator maintains the fuel pressure at a preset level in the system, a raising rate fuel pressure regulator varies the pressure at a certain ratio depending on the current boost level.... Most aftermarket fuel pressure regulators give the tuner the ability to adjust the base pressure to suit their higher flowing aftermarket injectors (most RB engines have it set at approx 40 psi) .

It's the FUEL PUMPS and injectors that 'support' your sort of power buddy, the fuel reg plays a small role. It's not rocket science.

Edited by RBEE
  • 2 weeks later...
  • 3 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...