Jump to content
SAU Community

Recommended Posts

Hey guys ive got a r33 series 2 wreck at the moment and also have alot of series 1 parts if needed. all parts must go selling cheap,

negoitabe on price.

Lorenz: 0422 868 703 , located in Melbourne, Eastern Suburbs can arrange postage though.

* front and rear rotors and hubs conversion $250

* rear rotors, calipers, pads and hubs conversion $300

* front calipers $200 rear calipers $150

* Drivers doro white in good condition $40.

* Complete s1 & s2 interior message what you need, various prices

* r33 stock springs and suspension front and rear $150

* r33 stock dump pipe $40

* 2 heater cores $50 each

* factory clutch $50

* rear bumper $50

* 2x r32 gts-t wheels $50

* electric window motors complete with regs (driver and passenger) $80 each

* 33 gtr steering wheel with * apexi pod filter $50 as new * hicas unit $50

air bag?? $100 post-76509-0-74529400-1294877601_thumb.jpg post-76509-0-61161700-1294877853_thumb.jpg

post-76509-0-40653600-1294877420_thumb.jpg

*Various boost guages, (boost, vac,fuel etc) $20 each * Manual turbo ecu s2 $120

post-76509-0-84882100-1294877631_thumb.jpg post-76509-0-04252500-1294877685_thumb.jpg post-76509-0-74153100-1294877924_thumb.jpg

*s1 driver indicators $40 pair, (2 sets) * door trims lh and rh sides $30 each

post-76509-0-94973300-1294877712_thumb.jpg post-76509-0-68027300-1294877732_thumb.jpg

* I have a few sets of

stock r33 wheels starting from $150-$300

post-76509-0-00421500-1294877787_thumb.jpg

*3.5" mild steel exhaust * series 1 front seat

$250, cat back passenger $30 * series 1 rear seat $30

post-76509-0-33593700-1294877968_thumb.jpg post-76509-0-76283800-1294878019_thumb.jpg post-76509-0-45734500-1294878081_thumb.jpg

* front and rear rotors,drive shafts * 2x dash crash pad in * aftermarket side skirts

and hubs conversion (no calipers) excellent condition, $150

complete set $500 $50 each post-76509-0-36772500-1294878244_thumb.jpg

post-76509-0-28727500-1294878144_thumb.jpg post-76509-0-18556500-1294878198_thumb.jpg

*electric mirrors lh and rh side (white) $40 pair *all this series 1 interior $50

post-76509-0-71353600-1294878353_thumb.jpg post-76509-0-62875100-1294878279_thumb.jpg

*tailights $50 has small crack, ones leaks water *auto turbo cluster $60, 117, k's *air box snorkel $20

post-76509-0-90909000-1294823424_thumb.jpgpost-76509-0-93719500-1294823475_thumb.jpgpost-76509-0-53619400-1294823560_thumb.jpgpost-76509-0-87149000-1294823611_thumb.jpgpost-76509-0-78547300-1294823704_thumb.jpg

*drivers side switch

with arm rest $100 *petrol flaps $10 each *abs unit with 3 lines $150 *pedals $40 factory intercooler $50 electric mirror $20

post-76509-0-28075900-1294823681_thumb.jpgpost-76509-0-33442100-1294823807_thumb.jpgpost-76509-0-14574100-1294823836_thumb.jpgpost-76509-0-48898500-1294823865_thumb.jpgpost-76509-0-27163500-1294824030_thumb.jpgpost-76509-0-01665300-1294824123_thumb.jpg

*Auto shifter $40 *Master Cyclinder $20 *lh and rh mirrors silver $40 pair

post-76509-0-25782400-1294876285_thumb.jpg post-76509-0-89025000-1294876358_thumb.jpg post-76509-0-31211900-1294876484_thumb.jpg

*Weathersheilds $20 (2 sets)

post-76509-0-31216900-1294876523_thumb.jpg

* Washer Bottles (3 sets) $20 each * Auto Turbo Ecu $80 *Glove Box $20 each

post-76509-0-53731800-1294876578_thumb.jpg post-76509-0-59344000-1294876612_thumb.jpg post-76509-0-44882300-1294876679_thumb.jpg

*Series 2 Front Bar $400 no fog lights.

post-76509-0-20132000-1294876718_thumb.jpg

*Ac Fan $40 *Turbo Pipes $20 *S2 boot with Spoiler $60 *

post-76509-0-69471200-1294876781_thumb.jpg post-76509-0-13586900-1294876809_thumb.jpg post-76509-0-54242900-1294876937_thumb.jpg

and much more including wiper motors, dash parts (clocks,antenna switch etc), every little part you may need.

just call or message me on 0422 868 703 even if the parts are listed here.

Edited by SIC JET
Link to comment
https://www.sau.com.au/forums/topic/350166-r33-wreck-cheap-parts-s1-s2/
Share on other sites

  • 2 weeks later...
  • 1 month later...

looking for the driverside power mirror switch with console if u still have it m located in melbourne

also will take auto shifter

Edited by skysilv
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...