Jump to content
SAU Community

Recommended Posts

Hey guys,

Wanted to see what people had lying around in the garage and are willing to get rid of. I'm trying to re-roadworthy and tidy up a track car I recently bought. Please let me know if you have and bits I'm after, condition and a price.

I'm after:

rear washer jet

rear wiper motor

washer bottle with both pumps

boot lock clip

floor carpet

centre/wing brake light (with wiring intact)

horn

rear view mirror cover

p/s window seal from door card (if anyones got one fallen off or an old door card)

airbox and snorkel

a/c compressor, condensor and lines

A pillar trims (p/s and d/s)

Thanks for any help

Link to comment
https://www.sau.com.au/forums/topic/350292-wanted-r33-s2-gtst-bits-and-pieces/
Share on other sites

hey man, i might be able to help out with the rear view mirror and horn. There yours for $10. Both are in good condition. I've attached a picture of both items so you can just confirm that this is what your after. I only have one of the horns though as I think there are 2? don't quote me on that though.post-52764-0-08674900-1295153360_thumb.jpgpost-52764-0-10025500-1295153416_thumb.jpg

  • 4 weeks later...

hey tyrone thanks, I have already picked up those 2 parts, thanks anyway.

Anyone.

still looking for:

floor carpet

high stop light from S2 spoiler

A/C compressor, condensor and lines

hey bud i have an r33 s2 and i have the carpet in mine and im sure i could get alot of the parts you need as i have another one at work i have totaled

i have a rear wing with the led stop light in it and its a gtr wing and i also have these parts avalible if you would like to call me on 0415725472

standard wing

and alot of small bits and peices but i can also check the car tomorrow when im at work and see what else is there just im in townsville

  • 1 month later...

Hey guys update on parts i'm after.

high stop light from s2 spoiler

or alternatively a duck wing spoiler.

A/C compressor, condensor and lines

p/s door card, condition doesn't matter, i only want the window seal off it.

oil cooler and oiler filter relocator.

nismo gear knob

shift pattern placard

thanks

ben



  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...