Jump to content
SAU Community

Recommended Posts

alright so i got onto it this morning with perth finally seeing some cooler weather

first up i made a stensil to transfer onto the bumper

IMG_0312.jpg

used the body line of the bumper for placement on the car

IMG_0306.jpg

IMG_0307.jpg

used a drill to cut most of it out, i used a 10mm on the first but used a smaller 5mm on the second side, which was a smarter move

IMG_0308.jpg

still took a little bit of finessing to get them to fit,

IMG_0309.jpg

tried to fit without cutting the reo but it cant happen unless u cut the vents, so out came the grinder, and just notched the reo,

IMG_0310.jpg

IMG_0311.jpg

now they didnt fit perfect but am very happy with the end result, i just realised i havent taken a photo of the end result, but i will when i put the bumper back on, just waiting for the sickaflex to dry

these are "GT-R" vents made for the curve of the GT-R bumper, the non GTR one is slightly different (bumper i mean) thats prob why you didnt get a "Perfect" fit

they fit GT-Rs fine :)

glad your happy anyway

we have 32/33 ones back in stock now

Yeh mat I no that's why, it's not that noticable but doesn't quite follow the bumpers radius, pics will be up tomorrow morning, sorry fellas, couldn't believe i forgot the end product myself actually

ok sorry guys here are the pics, as i have said im real happy with the way it has turned out,

IMG_0316.jpg

IMG_0317.jpg

IMG_0318.jpg

and som top views of the vents against the front bar, the small gap is minimal, but for those who are in search of perfection, well u can decide

IMG_0319.jpg

IMG_0320.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...