Jump to content
SAU Community

Recommended Posts

hey mate how much u after for this? alredy have a turbo with heat shield but might need another one if i do my twin turbs setup

15 - 20 bucks..... and it is yours... where abouts are you located... i am in bondi sydney but can post...

give me a call on 0478058818

hey mate how much u after for this? alredy have a turbo with heat shield but might need another one if i do my twin turbs setup

<BR>hey mate how much u after for this? alredy have a turbo with heat shield but might need another one if i do my twin turbs setup<BR>
<BR><BR><BR>15 - 20 bucks..... and it is yours... where abouts are you located... i am in bondi sydney but can post...<BR><BR> give me a call on 0478058818

hey hands off my heat shield.

I am now doing a quad-turbo setup, so will need another 2 shields if u have some spares to sell. I have hand-made one out of an old garbage bin lid but still need 2 more to realise my dream. I will also need 3 turbos. I am on a budget so they don't need to be the same sort, prefer they are in working cond tho.

still for sale... give me a price that is reasonable... prob will take 10 bucks or there abouts if you were to come and pick it up.... bondi sydney...

not even worth selling for $20, it it was me I CBF packaging it. Its a recyle bin job!

thank you for your oppionative comment.... Are you a typical woman??? hheheheheee

still for sale: 20 ono

not even worth selling for $20, it it was me I CBF packaging it. Its a recyle bin job!

Cheap cheap cheap...... and could birds like tridenture and hardslapper (see a couple of comments above) not reply back, - go and try and locate your little worms or what ever you spend all day doing..... hehehehehehehe.....

Hardslapper i will give you the free turbos that you require for your three turbo setup, i will tell you where to put them, i will even give you instructions if you can not figure it out.... if you are really desperate i could even insert / install them for you! YOur setup however could probably handle four - five maybe more quite easily, and would probably achieve best results with maybe more than three ie rear kilowatts ????

heheheheheeee

(one of the more entertaining comments i have written!)

its a pleasure every time.... i look forward to doing business..... To think i am going to get $20 ono for it is cool.... ;-) heheheeheheeee

well, write a serious post, then you will probably get serious comments. Otherwise...well, you get the picture. But, will leave you to your sale.

PS i have decided to use 2 solar powered superchargers so will no longer need the 3 turbos, thank you for the offer of assistance with installation though.

well, write a serious post, then you will probably get serious comments. Otherwise...well, you get the picture. But, will leave you to your sale.

PS i have decided to use 2 solar powered superchargers so will no longer need the 3 turbos, thank you for the offer of assistance with installation though.

cooollll....... i mean that is hot stuff.... sun power... good luck with it..... i am sure you will go far...

still for sale.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...