Jump to content
SAU Community

Recommended Posts

I have decided to sell my beautifully restored GT-R. This GTR has been babied and has only done 2000 km in last two years basically to just keep everything maintained. It has been kept undercover and has been a hobby as I have another vehicle. The car is in excellent condition inside and out. All parts have been replaced including-

New R34 GTR N1 turbines

HKS V-cam system which uses V-Cam Shaft (248' and valve lift 8.6mm)and controling intake valve timing from low to high rpm to make the highest performance for turbines.($9,000)This is one of the few GTR in Aus with this system. Torque of boost is enhanced substantially. This system was installed by Gavin Wood at Auto Tech.

New NISMO Stabilizer/New HKS Lower Brace Bar kit(front middle and rear)/New HKS timing belt/ New HKS slide cam pulley/Greedy timing belt cover/New KSP Adjustable Wheel Spacer

Apexi Power FC with Hand Controller

New Tein Coil Over Suspension with EDC (Electronic Dampening Control) inside the car, it allows you to change the dampening in the drivers seat.

Twin-Cat Sport exhaust with Valve controller, giving ability to control loundness from Drivers Seat

Replaced all bushes to Super Pro Bush Kit (drives like newz)

The body has been protected by Quartz Glass Coating with 3 year warranty.

Full burgundy leather interior with GTR emblem

18 inch Deep Dish Alloys

Alpine Audio System

New window mall

The vehicle has been totally restored and all parts only 2000km old

All receipts

$22,000 PRICE DROP-baby on the way

Ben 0414644098

post-81193-0-29038500-1296558303_thumb.jpg

post-81193-0-38136700-1296558522_thumb.jpg

post-81193-0-70055300-1296558561_thumb.jpg

post-81193-0-22138200-1296558588_thumb.jpg

post-81193-0-08167900-1296558640_thumb.jpg

post-81193-0-50689800-1296558730_thumb.jpg

post-81193-0-23884300-1296558760_thumb.jpg

Edited by ben.gtr
Link to comment
https://www.sau.com.au/forums/topic/352468-r32-gtr-v-cam/
Share on other sites

what is that gtr emblem you have taken a pic of, is it embossed in the car somewhere?

what brand wheels is it running?

i'd also suggest higher quality external pics :)

leather actually compliments the car & works well with gun metal grey

Link to comment
https://www.sau.com.au/forums/topic/352468-r32-gtr-v-cam/#findComment-5660830
Share on other sites

Thought about trying to sell the V-Cam setup separate for 5k or something?....Then high teens for the car...someones parting out gets you bigger returns...good luck mate, its a tough market but there are buyers out there, patience.

Don't think a used V-CAM will fetch $5K anymore.

http://cgi.ebay.com.au/HKS-V-Cam-RB26DETT-Skyline-GTR-BNR32-BCNR33-BNR34-Step1-/140407524694?pt=AU_Car_Parts_Accessories&hash=item20b0f0cd56

Still impressive to see a r32 for that price with V-CAM though.

Link to comment
https://www.sau.com.au/forums/topic/352468-r32-gtr-v-cam/#findComment-5661076
Share on other sites

interested in this ride if still for sale in about a months time.... need to get loans sorted.... do you have any more external pics and also can you send a pic of the dyno tune sheet...

[email protected]

looks rediculously good for the price.........

  • Nope 1
Link to comment
https://www.sau.com.au/forums/topic/352468-r32-gtr-v-cam/#findComment-5665463
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...