Jump to content
SAU Community

Wrecking R33 Gtr Vspec '96 70,000Km


Recommended Posts

Wrecking R33 GTR VSPEC -70,000km

+ some r33 4 door

Series 3 dash surround $180

Passenger Airbag + Dash pad $200

Full Interior ('95 Blue) includes door cards $850

Rear window $50 (must remove)

Doors with wondows and electrics $140ea

Rear quarter windows $30ea

Exhaust - 3" Front pipes with 2 magic Cats into single 3.5 with rear cannon and center muffler(has flowed over 400awkw) Needs a paint and polish $450

GTR N1 Front bumper reo $200

R33 GTR G4 Coilovers (VGC) $700

Rear right Tail light $120

Rear Series 2 center garnish(black) $150

Carpet $70

A pillar cover with factory kenwood tweeters$90

Vspec Center gauges$100

Steering wheel $100

R33 GTR intercooler $150

4door R33 Rear bumper cover (silver) $200

4door R33 Rear reo $150

4door R33 Tail lights and Garnish(s1) $220

R33 Very good cond loom $250

R32 '93 RB26DETT runs well (will provide comp test) $3500

Lots of other parts..just ask

Things sold

Brembo's

Bonnet

Front Gaurds

Front bumper and lip

Motor

Matt

Adelaide SA

0413023669 or pm

Edited by BoostdR
Link to comment
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Thanks for all the replies! I also wanted to ask if wheels that were fitted on Ford Falcons would fit the 350GTs as well? In the area I'm at there aren't that many options for secondhand wheels and new ones here are way out of my budget. From what I've seen, most of the wheels that are available that were fitted on Ford Falcons have an offset of +33 to +36, with a centre bore of 70.5mm whereas the stock 350GT's ones are 66mm, can't seem to find any hubcentric rings that fit that difference though. 
    • 215/45/18 tyres are probably a little on the low side compared to the factory tyre, it should be closer to a 245/45/19, which will get you about an extra 11mm of height, and should make you speedo read a bit closer to reality. 245/45/19s will be a bit too far the other way and you risk a speeding ticket as your speedo might read slower than your actual speed.  245/40/19s would be correct if you are going to 19in rims, they will give you a similar total diameter to the 245/45/18 tyres.  
    • That's something I forgot to put in my list. The aggressive anti-squat in R32 is a f**king menace. I still need to decide if I'm going to drag the subframe out of my car and weld in the GKTech corrector kit. The main reason to dither is the need to switch to spherical joints in the lower arm to account for the twist induced in the rear pivot caused by lowering the front pivot. And yes...we do put better subframes in R32s, and I wish I'd gotten an S14 one instead of an A31 when I did the "take off and nuke it from orbit" HICAS delete all those years ago.
    • I have been looking at some setting on the alarms for the Q60 and what buttons do and so and also been looking for details on the alarm in my V37 which is a standard issue with the car. settings like window roll up and a few others seem to not work at all. i cant seem to find exact info on V37 alarms so Q60 is all i can really go off i have not tried 400Z alarm settings or info yet so that will be next. any one got like a sheet of info on the alarm system in the V37 as all my documents are in japanese but i thought the system would basically be like standard through similar models? 
    • I had a fuel smell coming from the drivers rear and pulled the tank out to inspect where it was coming from, turns out the breather hose from the tank to the filler neck was perished. I’m going to Japan next week and I’ll grab it while I’m there  pulled the oil tank apart and started cleaning this crap out of it, some brake cleaner and rags got it looking new again 
×
×
  • Create New...