Jump to content
SAU Community

Recommended Posts

Hi this is a complete POWERFC D-Jetro kit for r33 and r32 GTR skyline (414BN026 Kit) it can be used on R34 GTR, R32 GTST (rb20) and R33 (rb25) with pin swaps.

This ecu will handle any mods you are likely to encounter, we have used these on std GTR's all the way up to 1000hp cars. This particular unit has done less than 5000kms and is off our workshop race car. The car has been split up to make way for another project which is not a RB engine so it is surplus to our needs.

It comes with both map sensors and harnesses, if you are going to use it on a RB20 or RB25 let me know and i will include a RB26 Air Intake Sensor too.

Being a tuner i can objectively say the POWERFC djetro is probably the best ecu you can buy for your GTR regardless of cost... hence why we used it in our own car.

CAN LOAD IT WITH A BASE MAP FOR THE WINNER TO DRIVE TO YOUR LOCAL TUNER FOR IF YOU SEND ME YOUR MODS (injector CC and turbos etc)

post-34927-0-51193700-1296646313_thumb.jpg

I have had a few questions regarding running it on a RB20 and RB25, the Re-pinning needs to be done on the engine loom (male ecu plug), i cannot do it on the ecu without soldering to the board etc which i prefer not to do as its hard to reverse neatly.

would you say this is better than a Haltech platnuim pro ? i was thinking going this instead but not sure?

Horses for courses i like both ecu's, TBH if i had to choose between those two it would be whatever suited my hip pocket.. as end results would be the same. Just finished tuning a haltech plat pro on a 3L which made 520rwkw on a std bottom end so it too is very capable.

post-34927-0-05160600-1296722879_thumb.jpg

trying to send you a PM but your inbox is full. I want to put a deposit on it!!!

How long till you can pay the lot? just that i have a few guys looking at it this weekend.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...