Jump to content
SAU Community

Recommended Posts

Hi Folks,

i recently acquired simons old 32 4door, and i wanna learn the drifting basics, however i really dont wanna do it on the streets.

just wondering if you guys could give me a run down of what a drift practice day is like? people forgiving when you spin? ect.

Also what do you normally budget for one of these practice days? taking into account Tires, petrol, fee's ect.

any other information would be much appriciated.

thanks all.

i should also mention im no stranger to motor sport, just new to the drift scene

Edited by Stagea_G
Link to comment
https://www.sau.com.au/forums/topic/353276-drift-practice-days/
Share on other sites

Most pepole are quiet good just genral good manuers g a long way u spin get of track let next car pass slowly move back on i runn new tyress each meent i budget around 900 fuel for tow car and drift car new oil and filter an tyres on a budget u could do it easly under 500. BUt always a good night out

Most pepole are quiet good just genral good manuers g a long way u spin get of track let next car pass slowly move back on i runn new tyress each meent i budget around 900 fuel for tow car and drift car new oil and filter an tyres on a budget u could do it easly under 500. BUt always a good night out

Most people are quite good, general good manners will go a long way. If you spin, make sure you get off the track and let the traffic pass. Once traffic clears, slowly re-enter the track.

I run new tyres each meet, and budget around 900 including fuel for tow car, fuel for drift car, new oil and filter, and tyres. On a budget, you could easily do it for under $500. But it is always a good night out.

^^^ lol Damo on the translation :D

But in all honesty Grant, SAU is not a big drifting community - you will find a handful of drifters on here, but the vast majority hang out/post on NissianSilvia.com

You are obviously welcome on SAU, but this sort of thread will get a MUCH larger response on NS.com

The drift days are pretty cruisey, 90% of the people are out there to just have a good time.

As far as spinning out, there is etiquette to it, and generally if you spin out its not cool to sit there and do ringing/static skids mainly because it ruins the persons lap after you because they need to stop/slow down if there is a massive cloud of smoke so if you spin, get out the way asap but hey, every now and then if you loose it and get a bit frustrated a static skid can be good to releive yourself and its not so much of a problem. Everything in good balance man.

Don't bother with 2nd hand tyres IMO - they delam straight away, at the price they cost its not worth it, and then the track time you loose going back into the pits getting them changed etc all the time is wasting money aswell because time out on the track is $$$$$$.

~$100 for a tow out (petrol for the tow car & trailer hire)

~$30 worth of fuel in the drift car?

~$50 new oil/filter each session

$90 entry fee

$10 gate entry fee

$25 cams license (one year license can be purchased for $55 but you need to be apart of a club etc)

~$160 tyres... I can get tyres at $80ea loose brand new so a set usually lasts me a night if I don't do statics everywhere lol (good to carry a 2nd set incase you need to trailer up early due to running out of tyres)

Then you start breaking shit and then it gets expensive >_<

Get onto the drift school session May 7th.

Lots & lots of track time, $150 to enter? close to that but its so so worth it. Get great pointers from the big boys in the drift scene and is a GREAT day out... I did that for my first session ever and I am HANGIN' for the next one... in fact thats when I'll have my car ready again (lots of new goodies)

Good times! :laugh:

Just make sure you keep it fun haha

164770_485643353542_722233542_5943401_7275699_n.jpg

dont scando's into turn 1 unless u want your car to look liks this :laugh:

+1 to what Weezy said, dont be a idoit, there are other people on the track and doing burnouts/donuts just ruins it for them, dont drift around cars that have spun

if you really want to learn going to drift school or a private day is way better, drift school is great for practicing the basics, public days are a waste of money and full of idoits who think they are drift king

f**k ns.

Those cvnts are all proffessional drifters on need for speed underground a think they know all.

SAU needs more drifters on here that are just relaxed and do it for fun. Much Like we already have, so cheers for joining !!

As for an oil and filter change after every prac, that's up to you...I would say every 2 -3 peace pending what sort of oil temps your seeing and what your using...

I personally can't see the point of putting 50 bucks worth if oil over the neighbors fence onto her veg garden after 1

Hours worth of driving...

Tyres defs go brand new, there cheap as hell these days.

Get your cams license, other wise your throwing Monet away.

And make sure your tank is FULL and or get a surge tank

I killed my first RB at my first ever prac...

I generally budget 500 bucks per prac, then just hope like f**k nothing brakes..... Which it will.

:thumbsup:

Yea unfortunately im not a fan on NS.com, certain reasons which im sure most people agree on.

i guess the best way is to just get out and try. but i still appreciate anything, anyone has to say.

Just trying to get to the forum is hard enough these days. Downtime all over the shop since it was redesigned.

Not to mention the malware you get from the site lol.

  • Like 1
  • Nope 1

very one out there is pretty chilled, Yeah static burnouts/ donuts are a big no no, If there are marshals on the track, go slow past them like 25km max.

Yeah about $500 sounds about what I spend each prack, fuel entry tires ect.

If you spin Check if car are coming if you are gonna slow another coming car wait off the track, if you can get back out without slowing anyone down get straight back out.

Servicing I Put-mine up on a hoist check everything is tight before every practice/ comp get the tape measure out check my toe are about right, Change the engine oil after every 2nd or 3rd session depending on what it looks like. I replace tho oil filter after every session tho cheap insurance.

Nah go big scandos into turn 1 youll get good at panel beating

heres what mine looked like after the Jan practice

http://www.facebook.com/permalink.php?story_fbid=110003079075368&id=100001808548760&ref=notif&notif_t=like#!/photo.php?id=100001808548760&pid=155866&fbid=122455327824751

Much straighter now tho

Yeah I have been out to every practice in 2010 and plan to do the same this year as well as doing all the comps, get into it youll have a ball

  • Like 1

Most people are quite good, general good manners will go a long way. If you spin, make sure you get off the track and let the traffic pass. Once traffic clears, slowly re-enter the track.

I run new tyres each meet, and budget around 900 including fuel for tow car, fuel for drift car, new oil and filter, and tyres. On a budget, you could easily do it for under $500. But it is always a good night out.

Sorry about my bad english,

Also 500 is a good figure to budget on,but be aware that u may have breakages clutch,diff,gearbox,turbo.

All in all most pepole are out there for the fun of it and are not going to crack the shit if u spin and ruin there lap, but make sure u dont cut no one of and all will be good.

So when should we excpect to see you out a prac.

To someones comment above drift schhol is awesome i had been out to 3 pracs previously but drift school helped me improve alot and boost confidence.

Cheers bayden

Just don't go out there in a complete bucket of shit. Make sure everything works how you want it too.

I went out there a few times knowing the handbrake was cooked and all I did was spin all day and eventually f**ked the car on the inside of turn 1 ripple. Watch out for that one!

One thing I noticed, people are willing to help you out when they can. I got heaps of help from randoms when I f**ked my car. Just have fun and don't don't shit to serious.

And As Import S13 said be careful of the turn 1 inside ripple strip.

I bent a strut hitting it, several other cars have done suspension damage hitting it.

Evan Daws rolled his R31 a couple of years back hitting it.

Yeah its nasty

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...