Jump to content
SAU Community

Recommended Posts

In Melbourne, Frankston.

Will ship at your expense. I suggest e-go.com.au for the larger stuff, very cheap.

RB25 Gearbox, 1st,2nd, 5th and Reverse working fine. 3rd and 4th selector seems damaged, 4th gear synco was worn, then lost 3rd and 4th.

$400

Pics to come, see posts below.

RB25 Exedy Sports Tough clutch (new friction plates an be had from Andy at good prices here http://www.kudosmotorsports.com/catalog/exedy-exedy-clutch-parts-nsd098u-standard-drive-plate-p-595.html)

$150

RB25 Machined flywheel

$100

RB25 stock flywheel

$70

RB25 stock pressure plate

$70

DSC_1022.jpg

R33 Front and Rear brake calipers, seals in good cond. Complete with pins, clips and retainers. Still has the dust boost on the bleed nipples. Comes with rear pads, trw i think.

$400

DSC_1018.jpg

DSC_1019.jpg

DSC_1021.jpg

R33 RB25 Stock Exhaust

$250

DSC_1005.jpg

R33 RB25 Radiator, stock. Ne leaks, came out of a car with 108,xxxxkm

$80

Pics to come in posts below

R33 RB25 Radiator, large re-core. No leaks

$100

Pics to come in posts below

Link to comment
https://www.sau.com.au/forums/topic/353333-r33-gearbox-brakes/
Share on other sites

can the box be fixed will it give problems later on?

It can be fixed, just needs a new selector and 3rd/4th synco (hopefully).

how old is the clutch? and how much power were you running through it?

Well the base HD is good for ~250rwkw. I've got a HD running 200rwkw, but this clutch only ran in a stock RB25DET.

Gone

---------------------------

- gearbox

- rear calipers

Still for sale

---------------------------

- front calipers

- radiators

- clutches

- exhaust

Gone

---------------------------

- reo

- 1x radiator

- gearbox

- rear calipers

Still for sale

---------------------------

- front calipers

- radiator x3

- clutches

- exhaust

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...