Jump to content
SAU Community

Recommended Posts

Hey guys,

My stagea is 4WD turned RWD, Previous owner had the front driveshaft removed I believe.

I'm thinking about fitting wheels which are:

18*8.5 +22 on the front and 18*9.5 +35 on rears. 225/35 on fronts and 245/40 on rears

Will this be fine to run considering I'm RWD?

Thank you.

Edited by gersfan
Link to comment
https://www.sau.com.au/forums/topic/353381-stagea-staggered-fitment/
Share on other sites

Hi Rohan,

mate as long as rolling dia are same,should be sweet,

& as you may have read no need to pull front shaft,

Bubba is running RWD at moment with shaft in,

Good luck with small sidewall on WA`S poor roads,

how is he doing this? there is NO way you can safely run in rwd without pulling the shaft!

Bullshit. I've been running mostly in RWD since a couple of weeks before Powercruise. I have posted this up time and time again, if you refuse to believe, that's your problem but don't scaremonger.

Rohan, you want to run something like 225/40 and 245/35 to try keep the rolling diameter the same.. if you know what tyres you will be using, do a bit of research and match up some front and rears.

e.g. I run Federal 595's, if I was going to stagger I would go (depending on rim width) 255/35ZR18 90W 633mm OD and 225/40ZR18 88W 635mm OD

I think ATTESA can handle up to 5% difference before it flips out.

http://www.federaltyres.com.au/tyres/high-performance/595

18"

215/35ZR18 84W RF 606 7.0- 8.5 500

225/35ZR18 83W 613 7.5- 9.0 487

255/35ZR18 90W 633 8.5-10.0 600

265/35ZR18 93W 641 9.0-10.5 650

215/40ZR18 85W 629 7.0- 8.5 515

225/40ZR18 88W 635 7.5- 9.0 550

235/40ZR18 91W 643 8.0-9.5 615

245/40ZR18 93W 651 8.0- 9.5 650

225/45ZR18 91W 658 7.0- 8.5 615

245/45ZR18 96W 676 7.5-9.0 710

255/45ZR18 103Y XL 687 8.0- 9.5 875

235/50ZR18 101W XL 692 6.5- 8.5 825

255/55R18 109V XL 735 7.0- 9.0 1030

I ran staggered offsets with it still being 4wd. 8.5 +22 and 9.5 +25's. It was fine. Ijust ran 235/45s front and rear.

If your's is an auto, you will struggle to get a 9.5 +35 to fit. I run +22 and without camber arms it touched the coilover body on big bumps.

I ran staggered offsets with it still being 4wd. 8.5 +22 and 9.5 +25's. It was fine. Ijust ran 235/45s front and rear.

If your's is an auto, you will struggle to get a 9.5 +35 to fit. I run +22 and without camber arms it touched the coilover body on big bumps.

Manual, I'm probably just going to get them and if I have problems I'll change the tires so that diameter is the same.

Thank you everyone.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...