Jump to content
SAU Community

Recommended Posts

Hey guys,

Got another set of wheels for sale, taken off one of the cars I recently purchased.

They are quite rare in this size and cost a sh!tload brand new. Wheels are silver with polished lip.

Will post pics up tomorrow night but from memory 2 of the rims have slight gutter rash.

Tyres were quite worn will check tomorrow but I'm sure there was at least 50% tread left on them. Good for atleast a couple (if not more) track days.

They are 18x10 with a +20 offset, suitable for R33 and R34 GT-R's. May fit R32 GT-R's but will need some sort of guard mods (lipping) and some decent negative camber.

Located in Narre Warren North (VIC) but will ship interstate at buyer's expense.

PRICE: $3200 ono

Pics to come.....

Cheers,

Jack

OK, here are some pics.

12022011060.jpg

Pics of each individual wheel...

12022011061.jpg

12022011062.jpg

12022011063.jpg

12022011064.jpg

And some of the tyres...

12022011066.jpg

12022011071.jpg

As the pics above show there are a few marks on 2 of the rims, and the tyres have a bit of life still left in them....

PM or reply if interested, price is negotiable...

Cheers,

Jack

+1

These will fit in 32 GTR, maybe narrower tyres though.

Best of luck in sale Jack, I miss these.

+1

These will fit in 32 GTR, maybe narrower tyres though.

Best of luck in sale Jack, I miss these.

Yeah I'd say maybe a 245 or 265 wide tyre might do the trick.

oh geez.. jack, why do you always sell awesome rims that wont fit my evo? :(

Buy a GT-R!!! :P

Still for sale......

  • 2 weeks later...

^^ Nah, I bought a set of CR KAI 18x9.5 +20, had 245/40/18 all around, and it rubs badly. took it off after 8days and sold it for dirt cheap price lol.

Have you got coilovers in your evo? Bit of camber, shaving the rear bar and the bolts for the rear bar in the wheel arch and they fit, although a +20 i don't know if it would fit haha. Plenty of evo's running 18x 9.5 though. I'll be running 18 x 9 on mine

^^ yep, cusco zero 2R, -2ish camber, still not good.

didnt shave the rear bar and relocate the bolts though..

anyway sorry for hijacking your thread, Jack. wondering what's the next rims you'll put on for sale.. :)

Edited by gerz
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia body...
    • This. A 3d wheel alignment is like $120...just take it to the shop. Since theres probably multiple adjustments that need to be made after changing something. Mine has front/rear lower arms, traction rods, tension rods, camber arms, toe arms, front upper arms, hicas kit, sway bars and coilovers. I measure from the edge of the bolt holes on the originals and set the same length on all the adjustable stuff to dial it as close as I could to OEM. Took it straight for alignment; it didnt feel right at all...after alignment, it feels perfect. Similarly i've just changed the springs on another car; and I still needed multiple adjustments to bring it back in spec.
    • A full Veilside kitted JZA80 Supra in Meriken park in Kobe city a few weeks back
×
×
  • Create New...