Jump to content
SAU Community

Recommended Posts

  • Replies 199
  • Created
  • Last Reply

Top Posters In This Topic

it seemed to go about its business quietly,. but didnt look on pace all weekend. not sure if thats a comparison of where the cars at or they had issues.

We struggled with getting to know the track more than anything else as first timers....and then getting a clean lap without red flags on the Sunday when cars were blowing engines most everylap in the WTAC 'wrecking yard'. IMO the car has a fairly easy 1.39 in it as you would expect from its Mallala pace. This weekend was about having fun, helping out our customers, and bringing it home in one piece. Although I would have liked to have seen faster lap times - you cant have everything :)

As a positive we didnt have a single mechanical issue with our car, and one of our GTRs won Clubsprint. The GT Auto car which uses a lot of our transmission technology also lapped well and was fastest GTR of the event, and now in Australia.

The Willall GTR posted the highest indicated straight speed of any car that we saw (including the pro cars) at 254km/h on the start/finish line - showing that we still have what it takes in the GTR drag game if nothing else :closedeyes::thumbsup::cheers::pirate:

Setup and tyre selection is the key for EC by the looks of it. We will make sure those two variables are where they need to be for next time :)

The driver did a very good job considering the corner speed we were giving away with a total lack of grip...kind of my mistake that one too!

We struggled with getting to know the track more than anything else as first timers....and then getting a clean lap without red flags on the Sunday when cars were blowing engines most everylap in the WTAC 'wrecking yard'. IMO the car has a fairly easy 1.39 in it as you would expect from its Mallala pace. This weekend was about having fun, helping out our customers, and bringing it home in one piece. Although I would have liked to have seen faster lap times - you cant have everything :)

After simons small misfortune. was really expecting a 'drifters dropping oil from you Martin', poor form, lol

car looked damn quick down the straight, but as you said looked to struggle a little bit with corner speed, particularly through turns 6 and 7

hope Gareth has a nice new outfit for saturday :wub:...lol

Who or what is a Simon and what misfortune?

I believe this is a Simon, and this is/was his misfortune

back from WTAC and not a good result :( motor spun several bearings after just 7 laps. dropped oil from a failed oil cooler fitting on first lap out and then fixed it up and filled it back up and it seemed ok. but 7 laps in and it started rattling really bad.

haha, you get those 295's from the pits after?

I was gonna grab them but just alittle to wide for me :(

Yep - couldn't resist the price...... Sorted for Legend of the Lakes now, and perhaps a single lap flyer at Mallala!!

The Willall GTR posted the highest indicated straight speed of any car that we saw (including the pro cars) at 254km/h on the start/finish line - showing that we still have what it takes in the GTR drag game if nothing else :closedeyes::thumbsup::cheers::pirate:

I had plenty of time to look at that radar (courtesy of sitting up in the tower with nothing to do) and it was reading differently depending on where it picked up the cars on the track.

For the record, Sierra Sierra logged 298km/h (on their own data logger) at one stage ;)

Edited by Iron Chef

yeah, cost him a motor sadly, id say/ hope he's going to improve the set up, as its not the first time its popped off

Maybe thats not bad luck then - its not often you get a warning to fix something like that and get away with it in the first instance....

As for the speed trap Iron Chef, it was very hard to work out how and where it picked up even watching it closely.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...