Jump to content
SAU Community

Recommended Posts

hey guys iv done some research on rb25det and i am stuck on where to begin my "slow" build..i recently bought my car and i have no clue how long its been since anything has been changed/upgraded or serviced such as coilpacks/spark plugs etc, thats why i need help on starting from scratch and dont know where to start first.

my car is stock with NO mods(apart from 3inch turboback exhaust), im looking to get as much power oout of her without having to machine my engine or mess around with the internals.

i need help in the following..

-fuel pump?

-fmic or smic?

-injectors?

-turbo?

-ecu?

-cooilpacks/spark plugs?

-anything else that is a good upgrade would help.

please post your experiences/advice or any other info that may be helpfull, thanks for your time guys.

Link to comment
https://www.sau.com.au/forums/topic/354080-rb25det-help-needed/
Share on other sites

Why are you posting in the RB30 section? Read the Rb25DET turbo upgrades to see what people do to make more power. If your car is stock it can't really be tuned but see if you can find a local member to take it for a test drive to see if there are any obvious faults that need urgent attention.

Read the Rb25DET turbo upgrades to see what people do to make more power.

Got it in one.

There are soooo many ways to skin the cat in this instance that there is no "one" correct way.

It comes down primarily to budget and use of the car.

Please have a read of the RB25 dyno results thread, see the common parts people are using.

You then need to price them up and fit that into your budget.

Thanks.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I'd be worried about having to parallel park a boat like that. Magnificent car though.
    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
×
×
  • Create New...