Jump to content
SAU Community

Recommended Posts

mines triple flow cam cover baffle plates for rb 26 motor $275 BRAND NEW

stop blow by in the head, reduces the need for a catch can

brand new http://www.mines-wave.com/english/CATALOG/...AFFLE_PLATE.htm

"In case of the Nissan RB26 engine, the engine oil sent to the cylinder head remains inside the head without moving to the engine block due to its construction structure. Such oil remained inside the cylinder head will be discharged out together with the blow by gas since the oil will change its location according to the vehicle acceleration/slow-down & cornering. The Triple Flow Cam Cover Baffle Plate from Mine's has 3-layer structure, always maintains the gas passage. In addition, the gas/oil separator slows down the blow by gas flow and reduces the quantity of the discharged oil."

accidently ordered 2 pairs

$275

can meet in town weekdays for pickup

posted here, if any interest before posting in SAU classifieds

PM if interested

regards Jason

baffles1a.jpg

Greddy Turbo Timer with r32 harness - pretty much brand new $120

3 Drift Gauges (boost, water temp, oil pressure) $40 each

K&N pod filter - $20

how big are the boost gauges?

52mm or 60mm?

boost gauge is that in psi or bar?

Do you have the sandwhich plate for it?

PM me please

FOR SALE:

1992 Kawasaki ZXR750

Good condition, runs great

Has rebuilt gearbox and rebuilt carbs

Quick sale ... bargain $2000

Road registered or good for track bike

2003 GSXR600 Race/Track Bike

This has been my race bike for over a year. Selling due to downgrading to 250cc grade.

23,000kms engine. Engine is A1

2 sets of race glass

Tyre warmers and race stands

Full Leo Vince race system, Power Commander IIIr piggy back ecu

Showa USD fork conversion

Frame has been worked on and approved by Adrill Engineering

Raced for 3/4 of one season before I broke my shoulder. Only track days since.

Bargain $5,000 ono

Now the biggie! ...

2004 MV Agusta Brutale F4

Italian style and engineering with a 4cyl engine designed and built by Ferrari (hence the "F4")

Pure porn with carbon fibre parts (over $2,000), Ohlins adjustable shock ($2K)

Bike retails for $23K new

Fully rebuilt and customised with under 2K on the clock

$18,000 ... no dreamers ... no test rides.

PM for more info and pics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...