Jump to content
SAU Community

Recommended Posts

For Sale

R33 GTST front brake rotors 297mm - $100

RB stock flywheel - $40

RB stock clutch plate and pressure plate $40

Series 2 stagea front calipers $50

RB cas $50

Stagea drivers side glass (very tiny chip in it) $40

genuine Sard FPR with gauge $100

PM me. No time wasters. :verymad:

ISC R34 Camber arms (rear) brand new in box - $170

JJR R34 rear strut brace - only test fitted - $100 same price as Just Jap

RB Oil cooler kit with relocator. Comes with long braided lines - $260

R34 GTT, manual, turbo, etc. $22,000

Cleaning out my garage, heaps of stuff for sale, make offers im fairly negotiable on most stuff need it all gone this week.

R33 HKS Hipermax II D Coilovers - $600

Preload/height and damper adjustable

Rear right camber top needs a new bearing as its knocking, otherwise they drive perfectly fine, doesnt affect performance, just noisy.

R33/R34/S14/S15 rear camber arms - $100

never used, got some chips in paint from getting moved around

RB20 ecu remapped for R33 s2, 12psi, zorst, cooler - $200

R33 window weather shields - $50

Apexi cannon muffler - $80

R33 D1 style 30mm front guards, primed in 2k grey - $200

R32/R33 Standard dump and front pipe with oxi sensor - $50

R33 side mount intercooler, good upgrade for r32 - $50

R33 standard sway bars, front and rear - $50 ea

R33 Auto tailshaft - $50

R33 s1 wing, few scratches - $20

R33 Auto shifter assembly - $20

R33 Auto shifter surround - $20

R33 Auto brake pedal assembly - $10

R33 Rear seats - FREE

2x 265/35/18 Maxxis MA-Z1 tyres, 40-50% tread, sidewalls have a bump in em, good for skids or burnouts - $50

PICS:

th_DSCF0084.jpg th_DSCF0070.jpg th_DSCF0081.jpg th_DSCF0077.jpg th_DSCF0069.jpg th_DSCF0068.jpg

th_DSCF0072.jpg th_DSCF0071.jpg th_DSCF0073.jpg th_DSCF0074.jpg th_DSCF0075.jpg th_DSCF0085.jpg th_DSCF0083.jpg

ok guys... ive belt some valves in my car... so need to round up my spare stuff i had laying around incase of a defect to get some money behind me

came off my stagea (25 neo) at 90ks all items are in IMMACULATE condition.

r34 pink label AFM $50 as new... will suit other 25's

r34 injectors full set. were put strait into snap lock bags when they came out $100

r34 bov (will suit all 25's and maybe a 20??) $30

r34 coilpacks.. will only suit neo motor. replace your arching out ones $100

series 2 stagea brakes full set... pm for details or see stagea section.

well i dont have time to do the ebay listing now so will give people one more chance to grab these. If i get home from work tonight and they arent sold then they go on ebay, so here it is again.

have a pvr or 2 that i won as prizes that i dont need so looking to sell them. Was going to swap one of them for a car but decided i need the money moreso to buy shit for the silvia.

1. Topfield TF7100HDPVR, 500gb hard drive high definition PVR, after $550 $400. RRP $699

http://www.harveynorman.com.au/product/125...der-with-gb-hdd

2. Beyonwiz DPP2, 500gb hard drive high definition PVR, after $650 $500. RRP... $799

http://www.harveynorman.com.au/product/125...-twin-tuner-pvr

Will give these a few days here before going on ebay, both are brand new.

Will post at buyers expense.

nardi torino, pretty average condish. yours for a hundred bucks. or trade for an airbag type boss kit to suit an s14.

selling it because ive got a sweet sparco now.

IMG_3948.jpg

IMG_3949.jpg

IMG_3950.jpg

IMG_3951.jpg

Edited by scandyflick

oh yeah... almost forgot this.

guaranteed to make people think youre cooler than you actually are!*

Make/Model: Nissan S14A

Year: 1996

Kilometers: 165,xxx

Transmission type: 5spd manual

Engine: SR20DET

Colour: Red

Modifications: See below

Roadworthy Certificate: N/A

Registered: Yes, til October.

Accident History: None.

Asking Price: $15k... open to sensible offers though.

Location: Adelaide SA

Contact Details: PM or call me on 0408961657 (after 5 pm).

Other Comments:

Regretful sale, but its time to move on.

Bought it dead standard in late '08 with 151,000ish kms on it.

Since then, I've done all this;

Interior & Electronics;

Clarion DB286USB HeadUnit

Clarion SRG1620R 2 ways (parcel shelf)

Clarion SRQ1620S Components (doors)

Unknown boss kit

D1 Spec quick release

Sparco R323 Suede steering wheel

NISMO Gearknob (+ dildo shifter for shits and giggles)

JDM S2 stereo, climate, and gear surrounds.

VELO GP90 Drivers Seat on modified Bride rail

STRI White Face Gauges for; Boost.

Shadow White Face Gauges for; oil temp, oil pressure.

PIVOT Water temp gauge

Bosch 6000K HID kit and arctic white parkers

Extended + battery cables

SuperCharge Slim battery

35% Tint

Alarm

Engine/Intake/Exhaust/Cooling;

Standard turbo rebuilt and highflowed to 2860 specs

Genuine Nissan coolant

K&N Oil Filter

HKS Alloy suction kit

Elf Excellium 5w/40 fully synthetic

NGK BCPR6ES plugs (.8mm gap)

Modified Airbox w/ cold air duct + K&N element

M/Steel 3" Apex'i Catback exhaust

AM Performance S/Steel Dump & Front (with seperated wastegate flow)

X-Force Catalytic Converter

Brand new Genuine Nissan Gaskets for; Mani -> Turbo, Turbo -> Dump, Cat

Brand new Genuine Nissan turbo studs

Brand new Genuine Nissan Water lines

Braided Steel oil line

Deleted BOV

Cooling Pro FMIC w/ custom brackets

Custom S/Steel 2.5" intercooler piping

Turbotech MBC (hybrid ebc wired in, needs tune)

Earls oil cooler and relo kit with speedflow fittings

R33 GTR fuel pump

Nismo Mounts

KTS Engine Torque Damper

Driveline;

Standard 5 spd Box

Xtreme Heavy Duty Organic Clutch

Nismo Mount

Standard Nissan "LSD"

Wheels & Tyres;

Front;

Work Equip, 17 x 9 +17

225/45 Kumho KU36 (brand new)

Rear;

Work Equip, 17 x 9 +17

225/45 Kumho KU36 (down to about 30%)

Brakes;

Front;

RDA Slotted Rotors w/ ACRE Street pads

HEL Braided lines

Rear;

RDA Slotted Rotors w/ Bendix SRT pads (less than 200k's on them, worth over $300)

HEL Braided lines

Fluid;

Penrite syn 600

Suspension & Steering;

Cusco Zero 2 R Coilovers

Cusco Front strut brace

Cusco Camber Arms

KTS Tie rod ends

Kazama castor rods

Body;

JDM Kouki wing

JDM front bumper w/ foglights

Navan Zenki side skirts

Navan Zenki rear pods

Rolled guards

Domokun chilling the rear quarter glass.

Performance;

136rwkw @ Graham West Workshop (Catback exhaust, exhaust leak at turbo, missfire, 11psi, 14/3/09)

171rwkw @ Morpowa (dirty and untuned, 2860, full exhaust, cooler, standard pump, 14psi, somewhat naffed pump)

170rwkw @ Morpowa, same as above, but with gtr pump and mega rich mixtures.

PB of 1:27:00 @ Mallala.

On top of all that, has a brand new pair of kumho KU36's on the front.

And I'll throw in a set of blitz 550cc injectors, QFM A1RM rear pads (new), an ATS carbon single plate clutch (that needs a rebuild), and if wanted, i may be able to arrange a Z32 afm with plug for an additional $200.

I'll also be including, 4 stockies, 2 with legal tread, 2 without, standard dump and front pipe + cat, standard drivers seat, standard struts/arms/rod ends, standard front bar, standard intecooler/pipe work/bov, standard boost solenoid, spare rear garnish, spare bootlid w/out spoiler (does have holes).

I'm happy to remove parts to make it more affordable.

Its been religiously maintained, I don't stick to a service schedule so much as service it whenever I believe it's appropriate... or have nothing better to do. As such, it's been serviced with quality oils (at first, motul, more recently; elf excellium) and filters (nissan, and more recently k&n) every couple thousand kays (9+ times since purchase). It's most recent service was 2 weeks ago, changed oil, filter, plugs, fuel filter, and fitted a brand new k&n air filter. I'll be servicing it again in the coming days.

A compression test was performed mid last year for peace of mind, came back with 141-145 across the board, a leak down test was performed at the same time and returned results within factory tolerances.

A suspension safety checked was performed recently, with everything showing up apples.

And its passed regency with minimal work, standard wheels, borrowed standard exhaust (or baffle plate), standard boost controller, removed gauges, standard seat, and it's through without incident.

Also, unless you make me a sweet deal, it will be sold with the standard steering wheel, not the sparco.

Now for the bad. there are a couple small chips in the paint, and some poorly repaired parking lot damage to the rear drivers side guard. I'll get pics of all this up later... and that's about it.

Basically, as it is, it's an lsd and a remap away from being whatever you want, drift car, grip car, hills car, or just leave it as is and have a bullshit tough streeter, it's up to you.

838309482_oAwyJ-M-1.jpg

835674108_k53PX-L-1.jpg

IMGP0239.jpg

IMGP0172.jpg

IMGP9635.jpg

IMGP9930.jpg

IMGP6530.jpg

IMG_3770.jpg

IMG_3769.jpg

IMG_3771.jpg

IMG_3777.jpg

IMG_3780.jpg

sandwich.jpg

post-a253946-IMGP3271.jpg

IMG_3159.jpg

IMG_2132.jpg

IMG_2559.jpg

IMG_3174.jpg

IMG_3944.jpg

IMG_3943.jpg

*guarantee may not be valid in Australia.

Edited by scandyflick
Cleaning out my garage, heaps of stuff for sale, make offers im fairly negotiable on most stuff need it all gone this week.

R33 HKS Hipermax II D Coilovers - $600

Preload/height and damper adjustable

Rear right camber top needs a new bearing as its knocking, otherwise they drive perfectly fine, doesnt affect performance, just noisy.

R33/R34/S14/S15 rear camber arms - $100

never used, got some chips in paint from getting moved around

RB20 ecu remapped for R33 s2, 12psi, zorst, cooler - $200

R33 window weather shields - $50

Apexi cannon muffler - $80

R33 D1 style 30mm front guards, primed in 2k grey - $200

R32/R33 Standard dump and front pipe with oxi sensor - $50

R33 side mount intercooler, good upgrade for r32 - $50

R33 standard sway bars, front and rear - $50 ea

R33 Auto tailshaft - $50

R33 s1 wing, few scratches - $20

R33 Auto shifter assembly - $20

R33 Auto shifter surround - $20

R33 Auto brake pedal assembly - $10

R33 Rear seats - FREE

2x 265/35/18 Maxxis MA-Z1 tyres, 40-50% tread, sidewalls have a bump in em, good for skids or burnouts - $50

PICS:

th_DSCF0084.jpg th_DSCF0070.jpg th_DSCF0081.jpg th_DSCF0077.jpg th_DSCF0069.jpg th_DSCF0068.jpg

th_DSCF0072.jpg th_DSCF0071.jpg th_DSCF0073.jpg th_DSCF0074.jpg th_DSCF0075.jpg th_DSCF0085.jpg th_DSCF0083.jpg

how much for just the brake light in the R33 spoiler? I got failed on a roadworthy for 3 things, Oil buildup around the rocker cover, need new wiper blades and my rear brake light on the spoiler doesn't work!

ahk was after front sorry to waste ur time

I've got Wilko's R34 rotors now. But I do have R33 GTST rotors if that helps?

Got the 34 rotors on now, so the 33 rotors are for sale.

:blink:

going to sell the 17x8" stitch evolution mags soon.

also, probably wont sell the wilwood superlite calipers; want to do this track car project....

selling

Uwe Jean Ballou R32-GTR 17x9.5 inch rims +23 offset

with Marshal Matrac TX tyres, 235/45/17 x4

tyres good as per photo. dish.

fits over GTR calipers

$700

DSC00810.jpg

DSC00808.jpg

DSC00807.jpg

DSC00809.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...