Jump to content
SAU Community

Recommended Posts

R32 GTR Trust Jasma Exhuast 3" Cat back, also have larger front pipes(inc cat) to go with sale(not sure if trust front pipe though)

Cat back is all heat wrapped

Reasonable cond, has had some ressy swaps in its life, but passed with 89db at regency on mine.

$250, northern suburbs

sms or pm

0413 247 219

700cc SARD injectors to suit RB26

Excellent condition, only 3500kms of use.

Injectors will be available after March 6th.

With Bosch 044 and Sard Regulator these have supported 430rwkws at Factory base fuel pressure / pump fuel.

$550 - Western Suburbs

Fitting available for a little extra.....

PM me

I have a full set of S14 seats if anyone wants them? Upgrade your shitty S13 or R32 seats! Comes with rails and seatbelts if you want them as well

$250, take front and rear off my hands!

HSD HR Coilovers - $1200.

AMPerformance Full Stainless Steel Exhaust - Split Dump, straight though with HFC & Blastpipes - $1100.

Full R34 Nistuned ECU - $500+Standard Ecu.

Velo Podium 2 Fixed Bucket Seat With Mounting Bracket - $1000.

Bronze Work Xd9's 18x9+30 18x10+18 - With current tires and a spare - $2200.

Factory Option R34 Fourdoor Monsoon Shilds - $300

KKR Pineapple Bushes - $60

12" Soundsteam Taranchula Subwoofer inbox - $300

Contact via PM or 0432 581 798

700cc SARD injectors to suit RB26

Excellent condition, only 3500kms of use.

Injectors will be available after March 6th.

With Bosch 044 and Sard Regulator these have supported 430rwkws at Factory base fuel pressure / pump fuel.

$550 - Western Suburbs

Fitting available for a little extra.....

PM me

Just tried to Pm you but it didnt work, was going to ask you if the above your selling, would they fit in a rb25, thanks.

1) Item: R34 GTR Spoiler (Genuine)

Item Condition:

Good condition, Pearl White in colour, missing the adjustable part of the spoiler. (Can get carbonfibre copys of it)

Contact Details:

PM me

Price and price conditions:

Looking at 550 negotiable

2) Item: R34 4 door factory nissan side skirt LH

Item condition:

Good condition couple scratches and one crack where it goes into the wheel bay/arch area (apparently very common)

Navy blue metallic in colour

Contact me via PM

Price: $200

Located in WINGFIELD

post-70366-0-48138700-1298532165_thumb.jpg

post-70366-0-48479700-1298532580_thumb.jpg

1) Item: Cannon IP4300 duplex printer

Item Condition: Good condition, 1 of the black ink cartridges needs replacing pronto

Contact Details: PM me or ring me 0421932750

Price: $60 firm

http://www.canon.com.au/ftp/pixma%20ip4300%20techsheet.pdf

2) Item: Diamondview Flatbed Scanner

Item condition: Good condition

Contact Details: PM me or ring me 0421932750

Price: $25 fairly firm might come down if you buy either or both other items

3) Item: Pro Color Compatible ink cartridge 2x Black large and small cyan magenta and yellow and the chip reseter

Suits: PIXMA iP3600/ iP4600/ ip4700

MP540/ MP550/ MP560/ MP620

MP630/ MP640/ MP980/ MP990

MX860/ MX870

Item condition: Brand New

Contact Details: PM me or ring me 0421932750

Price: $45

post-13315-0-23192100-1298534643_thumb.jpg

post-13315-0-83984600-1298534649_thumb.jpg

post-13315-0-61058200-1298534654_thumb.jpg

Just tried to Pm you but it didnt work, was going to ask you if the above your selling, would they fit in a rb25, thanks.

Factory RB25 are side feed and GTR are top feed injectors, need to convert to top feed rail and need resistor pack as well. It can be done but I'll default to RB25 guru's to confirm.

ADR Monza fiberglass recliner with 180sx/s13

Decent condition just a little faded.

$150 with rail!

seat.jpg

RS*R Front pipe suit 180sx/s13 with some 3" split dump pipe (think the dump pipe has a crack)and a dead o2 sensor still init.

$50 for it all

IMG_0212.jpg

IMG_0211.jpg

180sx old school bird bath wing painted in champagne. Paint and wing are in great condition and fit perfect.

$100

post-24-12820481276211_thumb.jpg

IMG_0179.jpg

PRICE DROP!!

HSD HR Coilovers - $900.

Full R34 Nistuned ECU - $500+Standard Ecu.

Velo Podium 2 Fixed Bucket Seat With Mounting Bracket - $1000.

Bronze Work Xd9's 18x9+30 18x10+18 - With current tires and a spare - $2000.

Factory Option R34 Fourdoor Monsoon Shilds - $300

KKR Pineapple Bushes - $60

12" Soundsteam Taranchula Subwoofer inbox - $300

Contact via PM or 0432 581 798

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...