Jump to content
SAU Community

Recommended Posts

hey everyone , i've come to kinda a crossroad with my daily spec drifter thingy , as much as i love the lil rb20 for its unbreakable-ness im getting pretty sick of the severe lack of low down forward motive force.... so i've decided to either whack in a 25det or make it a 30det (just so you know this is kinda my spare car/daily/do while i'm building my other car) . My plan would be to use an average r33 25 head on a 160klm rb30 that's in my umm.. other daily/loaner with a ebay spec T67 and supporting mods . Now , my question is basically , is it worth the extra hassle to make the 25/30 over just whacking in the 25 for an aim of around 280-300rwk , being daily driven (because the n/a auto r31 bores me to sleep) , the rev range i drive in with the rb20 is under 5k 99% of the time so it's not really being thrashed so much. Any advice is appreciated . cheers

p.s i have searched but i haven't really found the answer/s i'm seeking , i'm not so much looking for a power comparo , more of a drivability comparo and/or advice :) cheers

Link to comment
https://www.sau.com.au/forums/topic/354315-grenade/
Share on other sites

yeah cheers mate , i think i've pretty much talked myself into going 2530 combo , i have everything except injectors and the turbo itself. I didn't explain myself very well in the forst post sorry , part of my main worry is reliability, i suppose i'm kinda trying to cut corners and 'do it on the cheap' considering it's more of a side project while i'm saving up for my main project (rips bottom end , hopefully with a 26 head with an aim of around 400rwk hopefully reliably ). Do you guys think the bottom end is strong enough to hold around 280-300rwk with only a basic rebuild? or am i kidding myself?

edit: it only needs to live for 12 months :ph34r:

Edited by toffy
Link to comment
https://www.sau.com.au/forums/topic/354315-grenade/#findComment-5677309
Share on other sites

Do it. Going from a 2L to a 3L there is a HUGE difference in drivability.

It's really not very hard and if you are sensible with the build and tuning, it should live a long, healthy life.

If you prep the bottom end before hand, then the whole conversion can be done in a weekend (I drove in on a Friday afternoon, had a concert Saturday night and then drove it home about 1am Monday morning).

Link to comment
https://www.sau.com.au/forums/topic/354315-grenade/#findComment-5682183
Share on other sites

cheers guys , it's a goer by the looks of it , the laurel will be off the road as of this w/e. i won't have it done in one weekend though :blush: , gunna sell the 20 and box to fund injectors instead of going for the cheap n nasty std - high flowed :) . i'll post up a thread when i start :)

Link to comment
https://www.sau.com.au/forums/topic/354315-grenade/#findComment-5684712
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...