Jump to content
SAU Community

Recommended Posts

Up for sale is my CA18 silvia that i used for the track throughout last year. Selling because its time to start getting the new track project built and i need the cash for parts.

The car is basically full street trim, but i havent had a licence for over a year so i only used it for track but it can be registered and used on the street.

Details:

Nissan Silvia White

CA18DET 5spd manual

Unknown aftermarket clutch

S14 T28

GTR injectors

Z32 Air Flow meter

Apexi pod filter

Turbotech bleed valve

Steel Twin core radiator

Engine Bay mounted intercooler

3inch dump/front combo

GKtech De-cat

Apexi Catback

GTR fuel pump

Remap ECU (tuned for all the above)

S14 5stud conversion with brakes

S14 rear subframe with arms and LCAs

4.11 locked diff

pinapples

GKtech Lock spacers

JJR castor rods

Tein HR coilovers

S14 JDM NA seats

aftermarket Personal steering wheel and boss kit

C's Short shifter

Aftermarket stereo system

may have more stuff that i may have missed but thats pretty much all the major ones.

Bad points:

body and paint is okay condition but its not show spec. minor scuffs here and there and a bit of can work

bonnet has a dint on the passenger side.

car runs but ideally needs a retune as i was using a piggyback on top of the remap.

probably needs a new wheel alignment.

sounds like it has an exhuast leak from the dump pipe.

thats about all that i can think of at the moment, if theres anything else ill add it to the list.

Chasing $5000 but am negotiable on the price.

If interested, call/txt me on 0402736869

cheers,

Tom

NOTE: Car comes with R32 stockies all round

33oqm3c.jpg

4zybl1.jpg

23u8nzk.jpg

2cfz2bm.jpg

muz81s.jpg

33w12rs.jpg

Link to comment
https://www.sau.com.au/forums/topic/354683-nissan-silvia-ca18-vic/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...