Jump to content
SAU Community

Recommended Posts

When I start my car in the morning to go to work or when finishing work in the afternoon - the engine seems to be slugish.

What I mean is that as I accelarate up to 80kmh or so the engine seems to be missing. I have noticed that this keeps happening until the thermostat kicks in and after that it is fine.

Someone has told me it could be a faulty temp sensor.

Anyone experienced this before?

Where can I find this temp sensor?

Please help !

CW

R32- GTR

Link to comment
https://www.sau.com.au/forums/topic/35509-cold-start-problem/
Share on other sites

good point zoidberg... YAY your helping :D

if you are warming it up, how long does it take, does it warm up quick or take ages.

A dodgy thermostat will either not open at the desired temp (causing over heat)

or be stuck open all the time (making warming up take ages)

I wouldnt assume its the thermostat as this should only affect warm up times and engine temperature... AFAIK

a way of checking yr thermostat is working tho is to take of the rad cap, swtick in a thermometre and turn on the engine. iff all is well then the car should idle for a while with the radiater fluid temp staying steady, then it should heat up as the thermostat opens and starts letting coolant into the engine.

Mine does something similar. It feels like the timing is jumping around while the car is still warming up. Only does it when maintaining a speed or accelerating slowly. Idles fine or when under a bit of load. Then it will just suddenly be fine, like the computer switches from cold run mode to normal temp mode or something.

Definately either sensor or ecu related, not thermostat i think.

Mine does something similar. It feels like the timing is jumping around while the car is still warming up. Only does it when maintaining a speed or accelerating slowly. Idles fine or when under a bit of load. Then it will just suddenly be fine, like the computer switches from cold run mode to normal temp mode or something.

Definately either sensor or ecu related, not thermostat i think.

Definatelly not the thermostat - that is working correctly - Warming up doesn't take long. BHDave seems to have the identical problem as me.

I have checked spark plugs etc but the only thing left is the temp sensors if only I knew where to look.

Mine has always done the same.

When cold (especially in winter) the car develops what feels like a flat spot when cruising on a set speed or accelerating lightly.

Some times it starts to drive fine then it feels like some thing engages and the flat spot develops.

It only lasts for around 1km then dissapears.

Warm the car up for a couple of minutes and you won't notice it.

I'm suspecting it could possibly be some thing to do with the O2 sensors pre-heat function, as an O2 sensor doesn't work until it has reached a certian operating temp.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...